How to disable preview in Gmocappy

More
4 years 2 months ago #249860 by tarasko
Replied by tarasko on topic How to disable preview in Gmocappy
Thanks. I tried and this command does not decrease cpu consumtion. When I'm loading huge file and after that trying to set G54 X0 Y0 Z0 each time I need to wait huge amount of time during zeroing each axis.

Please Log in to join the conversation.

More
4 years 1 month ago #252665 by HansU
Replied by HansU on topic How to disable preview in Gmocappy
And unfortunately it also doesn't allow to program endless loops.

Please Log in to join the conversation.

More
4 years 1 month ago #252728 by tarasko
Replied by tarasko on topic How to disable preview in Gmocappy
Unfortunatelly On debian wheezy with RTAI kernel old version qtdragon not starting

Please Log in to join the conversation.

More
4 years 1 month ago #252729 by tarasko
Replied by tarasko on topic How to disable preview in Gmocappy
It completely disables not only preview with screen also MDI windown and file explorer window. I can't load file and monitor executed commands

Please Log in to join the conversation.

More
4 years 2 weeks ago #253972 by tarasko
Replied by tarasko on topic How to disable preview in Gmocappy
Unfortunately it doesn't work for qtdragon shipped in 2.8.4-8-g6bd693e60.
I added (PREVIEW,stop) into the ngc file and preview is still does exist.
Please examine attached image
 

Attachment not found

Please Log in to join the conversation.

More
4 years 2 weeks ago #253974 by tarasko
Replied by tarasko on topic How to disable preview in Gmocappy
For gmocappy of linuxcnc 2.8.4 (AXIS,stop) command does what I need. But also with some errors at the start of file load and when I settings G54 offset of loaded path. 

Attachment not found

Please Log in to join the conversation.

More
4 years 2 weeks ago #254059 by HansU
Replied by HansU on topic How to disable preview in Gmocappy
So (AXIS,hide) doesn't decrease the CPU load?
I guess it works with (AXIS,stop) because it makes gremlin terminate because of that exception...
 

Please Log in to join the conversation.

Time to create page: 0.241 seconds
Powered by Kunena Forum