Editing Gcode File / Save issues

Jeff_in_Wa
Topic Author
Offline
Senior Member

4 years 2 months ago #249903 by Jeff_in_Wa

Editing Gcode File / Save issues was created by Jeff_in_Wa

About a month ago, I noticed when I edit a gcode file within gmoccapy, when I click on "save to existing file", then exit the editor screen, there is now a popup asking if I want to leave without saving the change. Yet the file is updated and saved.

Please Log in to join the conversation.

zz912
Offline
Platinum Member

4 years 2 months ago #249906 by zz912

Replied by zz912 on topic Editing Gcode File / Save issues

This will be fixed in LCNC 2.8.3.

Or you can make RIP build and use 2.8 branche.
linuxcnc.org/docs/stable/html/code/building-linuxcnc.html

Please Log in to join the conversation.

HansU
Offline
Platinum Member

4 years 2 months ago #249914 by HansU

Replied by HansU on topic Editing Gcode File / Save issues

According to the website it should be already released: linuxcnc.org/2022/08/09/LinuxCNC-2.8.3/

Please Log in to join the conversation.

Time to create page: 0.110 seconds