tool change incompatibility

I recently swiched to gmoccapy and I'm not able to load programs with tool change.

This line was in my ini file since a long time ago and works without issue with axis : NGC file is attached

Using gmoccapy, when I load a file with a Txx M6 I get following error :

G-Code error in mill.ngc
Near line 0 of
/home/cnc/linuxcnc/nc_files/mill.ngc
M7x: restore_settings failed executing: ' F0,0': Bad character ',' used

Found this in the deleted stuff, i can not find a reason for it being deleted, so i restored it.
Please let me know if it should be removed.
Thank you.

furynick wrote:

M7x: restore_settings failed executing: ' F0,0': Bad character ',' used

This looks like a locale problem. F0,0 is invalid G-code, it should be F0.0

(it's in the mill.ngc file, not the toolchange.ngc file)