How to map keyboard keys to jog buttons

Hi,
How to map keyboard keys to jog buttons :

• Left arrow key : -X jog button
• right arrow key : +X jog button
• down arrow key : -Y jog button
• up arrow key : +Y jog button
• Page down key : -Z jog button
• Page up key : +Z jog button
• Begin key : G28
• End key : G30

Can it be made with HAL ? I don't see anything the documentation.

• Left arrow key : -X jog button
• right arrow key : +X jog button
• down arrow key : -Y jog button
• up arrow key : +Y jog button
• Page down key : -Z jog button
• Page up key : +Z jog button

These shortcuts are already implemented in Gmoccapy.
The AXIS user interface has shortcuts for homing and un-homing as well.

Jog keys doesn’t works

1. You have to enable them in the settings
2. They only function in Manual Mode

HansU wrote:

1. You have to enable them in the settings
 

how to ?

linuxcnc.org/docs/2.7/html/gui/gmoccapy.html#_hardware

HansU wrote:

linuxcnc.org/docs/2.7/html/gui/gmoccapy.html#_hardware
 

As simple
Thank's

For G28 an G30 is there a way in Gemoccapy ?

macsddau@linuxcnc wrote:

For G28 an G30 is there a way in Gemoccapy ?

[/quote]
Not by keyboard afaik