Gmoccapy tool table column

Serg452
Topic Author
Offline
Senior Member

3 years 9 months ago #261312 by Serg452

Gmoccapy tool table column was created by Serg452

Hello, can a table look like this, without X and Y?
linuxcnc.org/docs/html/gui/images/tooledit-sort.png

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

3 years 9 months ago #261406 by cmorley

Replied by cmorley on topic Gmoccapy tool table column

The widget that is in Gmoccapy, is capable of this, but I'm not sure how Gmoccapy handles customization. It probably depends on which version of linuxcnc you are using.

Please Log in to join the conversation.

HansU
Offline
Platinum Member

3 years 9 months ago #261925 by HansU

Replied by HansU on topic Gmoccapy tool table column

I think there a rare use cases for having X and Y offsets for milling machines: a second spindle or a side mounted camera.
So I think it's best to make a setting for that and I think it's okay to hide it by default.

Please Log in to join the conversation.

HansU
Offline
Platinum Member

3 years 9 months ago #261944 by HansU

Replied by HansU on topic Gmoccapy tool table column

The simplest solution if you are using the latest Gmoccapy version (3.4.1 - available in LinuxCNC 2.9) is to create a file

Code:

~/.gmoccapyrc

with the following content:

Code:

self.widgets.tooledit1.set_col_visible("xy", False)

Please Log in to join the conversation.

Time to create page: 0.079 seconds