Move the file after job finished

Hi,
I want to put a button on the screen that will move the current gcode file to a folder after the operator has cut the job.
Is it possible and how would one approach that if possible?
 

Hi,
Yes you can do this by adding an  embedded VCP (also called embedded tab) and write the functionality in a python script.

See here linuxcnc.org/docs/2.9/html/gui/gmoccapy....tabs-and-side-panels  

An example for such a VCP in Gmoccapy you can find here: forum.linuxcnc.org/gmoccapy/45856-spindl...k-in-gmoccapy#242882

And the filename you can get from linuxcnc.stat(): linuxcnc.org/docs/2.9/html/config/python...xcnc_stat_attributes (look for "file")

Awesome thanks Hans