Question: Gmoccapy 3.4.2 and touchscreen

More
2 years 11 months ago #286565 by pistrix
Replied by pistrix on topic Question: Gmoccapy 3.4.2 and touchscreen
I have just updated to LinuxCNC 2.9 and I have exactly the same problem. :( I wonder if anything has been solved about this?

Jan

Please Log in to join the conversation.

More
2 years 5 months ago #299886 by kofsky0328
Replied by kofsky0328 on topic Question: Gmoccapy 3.4.2 and touchscreen
I also encountered the same problem, unable to use the touch screen to drag the preview interface, linuxcnc2.9.2, gmoccapy3.4.6

Please Log in to join the conversation.

More
2 years 2 months ago #306567 by Obuhus
Replied by Obuhus on topic Question: Gmoccapy 3.4.2 and touchscreen
Hey, everybody. I have the same problem. LinuxCNC 2.9.3 released did not solve the problem. Any news on this issue?

Please Log in to join the conversation.

More
2 years 2 months ago #306568 by Obuhus
Replied by Obuhus on topic Question: Gmoccapy 3.4.2 and touchscreen
Hi. I have the same problem. LinuxCNC 2.9.3 released did not solve the problem. Any news on this issue? Thank you/

Please Log in to join the conversation.

More
2 years 2 months ago #307586 by SilverRain
Replied by SilverRain on topic Question: Gmoccapy 3.4.2 and touchscreen
I haven't been able to get 2.9.3 to work for over a month now. more and more new problems... on another machine 2.8.4 there are already 4 goals - everything is fine. I have no more strength. Tomorrow I will roll back to 2.8.4

Please Log in to join the conversation.

More
2 years 2 months ago #307646 by Obuhus
Replied by Obuhus on topic Question: Gmoccapy 3.4.2 and touchscreen
I agree. My project is in the stand stage on the table. But it works within its limits. However, It's not ok to not have a normal touch when it should be the default.

Please Log in to join the conversation.

More
1 year 7 months ago #323155 by Wischi
Replied by Wischi on topic Question: Gmoccapy 3.4.2 and touchscreen
Are there any updates on this? I am facing the same problem using Lcnc 2.9.4 and Gmoccapy 3.4.9. My touchscreen is recognized as eGalaxTouch. In Axis GUI and Gmoccapy with USB Mouse it works flawless. 

Please Log in to join the conversation.

More
11 months 4 weeks ago #337655 by juergen-home
Replied by juergen-home on topic Question: Gmoccapy 3.4.2 and touchscreen
There should be a link to:  forum.linuxcnc.org/gmoccapy/56140-previe...reen-gestures#328525

Please Log in to join the conversation.

Time to create page: 0.293 seconds
Powered by Kunena Forum