resizing virtual keyboard

pistrix
Topic Author
Offline
Junior Member

3 years 5 months ago #272043 by pistrix

Replied by pistrix on topic resizing virtual keyboard

Wonderful.

Thank you very much for your kindness and help.

Please Log in to join the conversation.

HansU
Offline
Platinum Member

3 years 5 months ago #272044 by HansU

Replied by HansU on topic resizing virtual keyboard

Glad to hear that it works for you

.
If you want to change the width, just search for 870 in this file and replace it by another value.

Please Log in to join the conversation.

pistrix
Topic Author
Offline
Junior Member

2 years 11 months ago #286564 by pistrix

Replied by pistrix on topic resizing virtual keyboard

I have just updated to LinuxCNC 2.91 and Gmoccapy 3.4.6. and the keyboard is again full width. I guess I cannot use the glade file you wrote for me but I need a new one compatible with Gmoccapy 3.4.6.

Could you please make a new glade for me with the keyboard width of 870 pixels?

Please Log in to join the conversation.

HansU
Offline
Platinum Member

2 years 10 months ago #287980 by HansU

Replied by HansU on topic resizing virtual keyboard

Maybe I'll add a setting to set the width of the keyboard...

Please Log in to join the conversation.

HansU
Offline
Platinum Member

2 years 10 months ago #289380 by HansU

Replied by HansU on topic resizing virtual keyboard

I implemented the Setting for LinuxCNC 2.9.2, see here: github.com/LinuxCNC/linuxcnc/pull/2813
It will be available soon in the 2.9 branch, but you can also copy the two modified files.

Please Log in to join the conversation.

rodw
Offline
Platinum Member

2 years 10 months ago #289413 by rodw

Replied by rodw on topic resizing virtual keyboard

2.9.2 has been released (se the downloads page) so I think you may have missed the boat.

Please Log in to join the conversation.

HansU
Offline
Platinum Member

2 years 10 months ago #289423 by HansU

Replied by HansU on topic resizing virtual keyboard

Maybe my post was a bit misleading. I wanted to say that I added it on top of the current version (2.9.2), so it is not included in the 2.9.2 release.

Please Log in to join the conversation.

rodw
Offline
Platinum Member

2 years 10 months ago #289424 by rodw

Replied by rodw on topic resizing virtual keyboard

HansU wrote:
Maybe my post was a bit misleading. I wanted to say that I added it on top of the current version (2.9.2), so it is not included in the 2.9.2 release.

This is where the lack of integration between the buildbot and linuxcnc.org/dists is an issue. There is no easy way to swap between the 2.9.2 release and the buildbot versions. The user will need to overwrite files in /etc/apt/sources.list.d
I'm not sure what the answer is.