Replacing jogging buttons with custom picture in Version 3?

Aciera
Topic Author
Offline
Administrator

3 years 5 months ago #271711 by Aciera

Replacing jogging buttons with custom picture in Version 3? was created by Aciera

In Gmoccapy version 2 I used to be able to replace the jogging buttons section in the gui with a custom icon with this line in the ini:

Code:

DISPLAY = gmoccapy -logo ../MyIcons/Images/vertikal_hell.ico

Having installed LinuxCNC 2.9 with Gmoccapy Version 3.4.1 I don't seem to be able to get that working anymore. Has this been removed in the new version?

Please Log in to join the conversation.

HansU
Offline
Platinum Member

3 years 5 months ago #271766 by HansU

Replied by HansU on topic Replacing jogging buttons with custom picture in Version 3?

This feature got stuck in a TODO comment while the conversion to Gtk3

Now brought back and should be soon in 2.9, see github.com/LinuxCNC/linuxcnc/pull/2461 especially github.com/LinuxCNC/linuxcnc/pull/2461/c...24a9a978832b8aa14b91

Please Log in to join the conversation.

Time to create page: 0.371 seconds