Thanks for the suggestions!
I replaced both the pyngcgui.ui and the pyngcgui_popupkeyboard.ui files with the ones from
github.com/LinuxCNC/linuxcnc/tree/master/configs/sim/gmoccapy
The new versions were very close to the old ones, except that the offending line was removed. I ran LinuxCNC, and the error I asked about had gone away. Unfortunately, the following error lines were still present from before:
Code:
Starting DISPLAY program: gmoccapy
60817411
not enough values to unpack (expected 2, got 1)
'btn_sel_next'
'btn_sel_prev'
'btn_select'
'btn_home'
'btn_dir_up'
'btn_jump_to'
not enough values to unpack (expected 2, got 1)
not enough values to unpack (expected 2, got 1)
'IconFileSelection' object has no attribute 'on_btn_jump_to'
not enough values to unpack (expected 2, got 1)
not enough values to unpack (expected 2, got 1)
Attribute error <GParamString 'icon-theme-path'> and <class 'str'> sans 10
Attribute error <GParamString 'icon-theme-name'> and <class 'str'> sans 10
This error was also present in the earlier run. Logs attached.
