Gmoccapy error

More
2 years 11 months ago #286048 by Serg452
Gmoccapy error was created by Serg452
hide turtle jog checkbox causes an error.
 

Attachment not found


And when booting too.
 

Attachment not found


Is there a solution other than keeping included?

Please Log in to join the conversation.

More
2 years 11 months ago #286050 by Serg452
Replied by Serg452 on topic Gmoccapy error
And another question is - how to add your icons so that they are not overwritten when updating?

Please Log in to join the conversation.

More
2 years 11 months ago #286057 by Aciera
Replied by Aciera on topic Gmoccapy error
Have a look here:
github.com/LinuxCNC/linuxcnc/pull/2732

Then here to see what you need to do and where:
github.com/LinuxCNC/linuxcnc/pull/2732/files

Please Log in to join the conversation.

More
2 years 10 months ago #287969 by HansU
Replied by HansU on topic Gmoccapy error

And another question is - how to add your icons so that they are not overwritten when updating?

You can put them in your home directory under ~/.icons see linuxcnc.org/docs/html/gui/gmoccapy.html#_custom_icon_theme

Please Log in to join the conversation.

Time to create page: 0.480 seconds
Powered by Kunena Forum