tutorial for Gmoccapy migration from axis ?

searched but came up empty, the google foo may just be weak today. Looking for a good tutorial on migrating to Gmoccapy

Back in the times, all that was required to change was editing the ini file, display section, replace display = axis with display = gmoccapy

I can recomend make new configuration with PNCconf.

tommylight wrote:

Back in the times, all that was required to change was editing the ini file, display section, replace display = axis with display = gmoccapy

Still the case for a standard configuration.
For example if you change in the axis_mm sample config
DISPLAY = axis to DISPLAY = gmoccapy, it will work.

But if you have a configuration that uses some of the axis-specific pins like axisui.XXX, it wouldn't be that simple.
And there are gmoccapy-specific pins as well that improves the usability. So recommend to use.