classic ladder not loading

rajsekhar
Topic Author
Offline
Elite Member

2 years 2 months ago #307936 by rajsekhar

classic ladder not loading was created by rajsekhar

Dear friends..
I was configuring a LCNC setup 2.9.2. I used PNC config.

Now, classicladder program is not loading automatically. It can be loaded from LOAD option in classicladder window.

HAL, INI, custom.hal file attached.

What wrong I did?

Please Log in to join the conversation.

Aciera
Offline
Administrator

2 years 2 months ago #307939 by Aciera

Replied by Aciera on topic classic ladder not loading

Try adding this to the bottom of your custom hal file. Make sure you replace <your_file.clp> with the one you want to load on startup:

Code:

# Load Classicladder without GUI (can reload LADDER GUI in AXIS GUI
loadusr classicladder --nogui <your_file.clp>

Please Log in to join the conversation.

rajsekhar
Topic Author
Offline
Elite Member

2 years 2 months ago #307989 by rajsekhar

Replied by rajsekhar on topic classic ladder not loading

It worked. Many thanks

Please Log in to join the conversation.

Time to create page: 1.819 seconds