Gmoccapy 3.5.0 - opinions needed

zz912 wrote:

How did you try it?

I would expect it to list all the tools from the program. Do you have more T in the program? T5, T4, T100 ....

Just uncomment the print statement in gmoccapy.py:4011 of my dev branch: github.com/hansu/linuxcnc/tree/gmoccapy-3-5-0

Yes I used a program with some different T commands...

Seems to work on axis (2.10):

 

Hallo Hans,

I do like your modifications. I prefer the progress bar under the g-code.
About the Icon it's just a matter of taste IMHO, I do not like the black and white icon, but I also see the need to reorder the button to reduce mouse movement.

G-code Properties is a nice feature, witch I would like to see
Even knowing that the values shown are not correct in most cases. But they do give a first impresion!

About the File Chooser widget, I was thinking for long time about a Widget designed like the Midnight Commander but unfortunately I have not even started to write the first line of code .

Norbert

Thanks for adding the progress bar Norbert. I often wonder roughly how much longer a program will take.

Aciera wrote:

Seems to work on axis (2.10):

 

Attachment not found

This file gives me this. Still an emtpy tool list:
Also a bit weird that it has the tools 0, 3, 1 in the list in Axis, but there is only T3 and T1 in that file.

newbynobi wrote:

I prefer the progress bar under the g-code.

Me too

newbynobi wrote:

About the Icon it's just a matter of taste IMHO, I do not like the black and white icon, but I also see the need to reorder the button to reduce mouse movement.

We can also have this icon in yellow, no problem

newbynobi wrote:

About the File Chooser widget, I was thinking for long time about a Widget designed like the Midnight Commander but unfortunately I have not even started to write the first line of code .

You mean that one that looks like the Norton Commander, so text based only?

newbynobi wrote:

G-code Properties is a nice feature, witch I would like to see
Even knowing that the values shown are not correct in most cases. But they do give a first impresion!

The question is only how to handle the embedded tab location "box_tool_and_code_info" ( linuxcnc.org/docs/devel/html/gui/images/...py_embedded_tabs.png ).

Should that replace the complete notebook with both tabs or only the content within the first tab?
The first would be better for backward compatibility but the latter would make more sense.

@Hansu,

G-code Info;
IMHO the embed Tab should hidethe complete Tool and G-code part.
Ideal would be allowing the user to hide the complete frame or just add a new tab to that location.

Midnight Commander / Norton Commander:
Yes I was thinking about a two parted window where you may select in each window a different content and with the bottom button it should be possible to copy, rename, move ore load the content of the selected file.

Norbert
 

This file gives me this. Still an emtpy tool list:

How are you accessing those properties, through the gstat-module?

newbynobi wrote:

Midnight Commander / Norton Commander:
Yes I was thinking about a two parted window where you may select in each window a different content and with the bottom button it should be possible to copy, rename, move ore load the content of the selected file.

Hmm I think a split view is not so suitable here as this is only to load files. i think for copy or move operations you should use the systems file manager. But renaming could be supported.

Aciera wrote:

This file gives me this. Still an emtpy tool list:


How are you accessing those properties, through the gstat-module?

Yes: github.com/LinuxCNC/linuxcnc/commit/5838...f0ddf6aa125c0885dcde

Maybe a bug in gstat then. It seems to work in QtDragon but I have no idea if that uses the same module. Chris would likely be the one to ask.