User Defined M-Codes M100-M199

1 year 6 months ago #325494 by michaeln

User Defined M-Codes M100-M199 was created by michaeln

Hello,
is it possible that Gmoccapy shows the User Defined M-Codes M100-M199, too?

Thanks!

Please Log in to join the conversation.

1 year 6 months ago #325516 by andypugh

Replied by andypugh on topic User Defined M-Codes M100-M199

Not really, as the system has no way to know if the user-defined codes are modal or not.

Please Log in to join the conversation.

Time to create page: 0.072 seconds