Change Tool Offsets after editing the Tool Table

More
1 year 5 months ago #327983 by hermann1976
Replied by hermann1976 on topic Change Tool Offsets after editing the Tool Table
Hi, I'd like to ask if I'm the only one experiencing this issue, or if it's a general issue with the Gmoccapy GUI?
When I perform a fresh installation on a virtual machine, I get the same behavior. So I assume it's a general bug in the Gmoccapy GUI.
Please let me know your experience... Thanks

Please Log in to join the conversation.

More
1 year 5 months ago #328045 by zz912
Replied by zz912 on topic Change Tool Offsets after editing the Tool Table
What version LCNC do you use?

Please Log in to join the conversation.

More
1 year 5 months ago #328048 by hermann1976
Replied by hermann1976 on topic Change Tool Offsets after editing the Tool Table
Current Release: 2.9.4

Thanks

Please Log in to join the conversation.

More
1 year 5 months ago #328099 by zz912
Replied by zz912 on topic Change Tool Offsets after editing the Tool Table
You can easy change it.

Add this code to gmoccapy.py file to "def on_btn_apply_tool_changes_clicked"
Code:
        if "G43" in self.active_gcodes:             self.command.wait_complete()             self.command.mode(linuxcnc.MODE_MDI)             self.command.wait_complete()             self.command.mdi("G43")             self.command.wait_complete()

like this:
 

Attachment not found



1) G43 must be activated
2) after input new value in cell you MUST confirm it for example by key ENTER, then you can click on Apply
3) after click on Apply button you will see right correction value
 

Please Log in to join the conversation.

More
1 year 5 months ago #328121 by hermann1976
Replied by hermann1976 on topic Change Tool Offsets after editing the Tool Table
Thanks for your answer.
But Linuxcnc will coming up with an error:

 

Attachment not found


 

Please Log in to join the conversation.

More
1 year 5 months ago #328124 by zz912
Replied by zz912 on topic Change Tool Offsets after editing the Tool Table
You probably have tabs on that line instead of spaces.

Please Log in to join the conversation.

More
1 year 5 months ago #328125 by zz912
Replied by zz912 on topic Change Tool Offsets after editing the Tool Table
It's a good idea to set this permanently in Geany:
stackoverflow.com/questions/5287849/how-...e-in-geany-on-ubuntu

I tested the code yesterday and found that it's a good idea to go back to MANUAL_MODE:
Code:
        if "G43" in self.active_gcodes:             self.command.wait_complete()             self.command.mode(linuxcnc.MODE_MDI)             self.command.wait_complete()             self.command.mdi("G43")             self.command.wait_complete()             self.command.mode(linuxcnc.MODE_MANUAL)             self.command.wait_complete()

Please Log in to join the conversation.

More
1 year 5 months ago #328142 by hermann1976
Replied by hermann1976 on topic Change Tool Offsets after editing the Tool Table
thank you for your answer,
so the code block is included like your post and i didn't get an error.
The change of the length in Z is working (with apply) but the diameter doesn't change still not.

 

Please Log in to join the conversation.

More
1 year 5 months ago #328154 by zz912
Replied by zz912 on topic Change Tool Offsets after editing the Tool Table
So try this:
Code:
        if "G43" in self.active_gcodes:             self.command.wait_complete()             self.command.mode(linuxcnc.MODE_MDI)             self.command.wait_complete()             self.command.mdi("G43")             self.command.wait_complete()             self.command.mode(linuxcnc.MODE_MANUAL)             self.command.wait_complete()                  self.stat.poll()             toolinfo = self.widgets.tooledit1.get_toolinfo(self.stat.tool_in_spindle)         if toolinfo:             self.widgets.lbl_tool_no.set_text(str(toolinfo[1]))             self.widgets.lbl_tool_dia.set_text(toolinfo[12])             self.halcomp["tool-diameter"] = float(locale.atof(toolinfo[12]))             self.widgets.lbl_tool_name.set_text(toolinfo[16])  

Please Log in to join the conversation.

More
1 year 5 months ago #328246 by hermann1976
Replied by hermann1976 on topic Change Tool Offsets after editing the Tool Table
Thank you very much - zz912.
Your last change is now working.
Regards, Hermann

Please Log in to join the conversation.

Time to create page: 0.063 seconds
Powered by Kunena Forum