More touch-friendly Speedcontrol-slider

Currently the value of the sliders can only be adjusted by the +/- buttons. This makes it impossible to change those values quickly.
Here are two implementations which opens a bigger slider with the possibility to drag the slider.

What do you guys think of those two versions?

That looks cool, but I added physical encoders for Jog, feed and spindle overrides, so I never use the buttons.

I think the popup of any kind is not strictly necessary but possibility to change value by sliding the slider are most welcome. Especially by users of capacitive Touchscreens. Original solution I think was created for resistive touchscreens where the +- buttons still are viable solution as sliding there would not work well.

deomon wrote:

I think the popup of any kind is not strictly necessary but possibility to change value by sliding the slider are most welcome. Especially by users of capacitive Touchscreens. Original solution I think was created for resistive touchscreens where the +- buttons still are viable solution as sliding there would not work well.

I have a resistive touchscreen and this works quite well.

I do not use GmoccaPy, but i would choose first version as it is much easier to use fast and when it becomes reflex.
Thank you.