Ball on stick

More
6 years 11 months ago #150238 by BigDo
Ball on stick was created by BigDo
Hi All,
can anyone possibly share a sub for a ball on stick like this.

thanks
Niko



Attachment not found

Please Log in to join the conversation.

More
6 years 11 months ago #150272 by pl7i92
Replied by pl7i92 on topic Ball on stick
why a SUB
do you make alot of different on this
you may be better up on CAD/CAM option
as well at is a individuell to the Tool you got

Please Log in to join the conversation.

More
6 years 11 months ago #150289 by andypugh
Replied by andypugh on topic Ball on stick
Using two tools, or getting as close as possible with just one?

If you need to do it a lot, at different sizes, then one option might be to install the G71 remap code and define the balls as an arc.

github.com/LinuxCNC/linuxcnc/blob/andypu...ughing-cycle-turning

Please Log in to join the conversation.

Time to create page: 0.087 seconds
Powered by Kunena Forum