NativeCAM is Features renamed

More
10 years 3 weeks ago #81386 by nkp
Replied by nkp on topic NativeCAM is Features renamed
error:
./ncam_setup: line 19: ` fi'

Please Log in to join the conversation.

More
10 years 3 weeks ago #81392 by BigJohnT
Replied by BigJohnT on topic NativeCAM is Features renamed
I can't get the ncam_setup to work either, replaced back ticks an single quotes with double quotes but it still has something in the file that errors out saying a back tick is there.

JT

Please Log in to join the conversation.

More
10 years 3 weeks ago #81393 by eFalegname
Replied by eFalegname on topic NativeCAM is Features renamed
Hi Fern, I have the same error :
Code:
./ncam_setup: riga 19: errore di sintassi vicino al token non atteso "fi" ./ncam_setup: riga 19: ` fi'

Please Log in to join the conversation.

More
10 years 3 weeks ago #81394 by nkp
Replied by nkp on topic NativeCAM is Features renamed
maybe:
if [ $cl = 'c' ]
then sudo rm $ncam/ncam.py
fi

Please Log in to join the conversation.

More
10 years 3 weeks ago #81396 by FernV
Replied by FernV on topic NativeCAM is Features renamed
Corrected files are on github
github.com/FernV/NativeCAM

Sorry, I messed up last night and collected the wrong file

Fern

Please Log in to join the conversation.

More
10 years 3 weeks ago #81397 by FernV
Replied by FernV on topic NativeCAM is Features renamed
Hi

Have you succeeded with the updated file ?

Fern

Please Log in to join the conversation.

More
10 years 3 weeks ago #81400 by eFalegname
Replied by eFalegname on topic NativeCAM is Features renamed
Maybe I should install something else before run it...
Code:
ef@pl ~/linuxcnc/configs/NativeCAM $ ./ncam_setup ln: l'obiettivo "/usr/lib/pymodules/python2.7/gladevcp/" non รจ una directory: File o directory non esistente Traceback (most recent call last): File "/home/ef/linuxcnc/configs/NativeCAM/ncam_setup2.py", line 14, in <module> f = open(fname).read() IOError: [Errno 2] No such file or directory: '/usr/share/pyshared/gladevcp/hal_pythonplugin.py'

Please Log in to join the conversation.

More
10 years 3 weeks ago #81401 by FernV
Replied by FernV on topic NativeCAM is Features renamed
Hi

My distribution is Debian Wheezy, I do not know about yours

in a terminal type (or copy this) : locate hal_pythonplugin.py

It should tell you where the file is and please let me know

Fern

Please Log in to join the conversation.

More
10 years 3 weeks ago #81403 by eFalegname
Replied by eFalegname on topic NativeCAM is Features renamed
path for linuxmint :
Code:
ef@pl ~ $ locate hal_pythonplugin.py /usr/lib/python2.7/dist-packages/gladevcp/hal_pythonplugin.py /usr/lib/python2.7/dist-packages/gladevcp/hal_pythonplugin.pyc

Please Log in to join the conversation.

More
10 years 3 weeks ago #81406 by FernV
Replied by FernV on topic NativeCAM is Features renamed
You can change the path in 'ncam_setup2.py' to reflect the difference in your system

change the line that says :
fname = '/usr/share/pyshared/gladevcp/hal_pythonplugin.py'
to
fname = '/usr/lib/python2.7/dist-packages/gladevcp/hal_pythonplugin.py'

also try to : locate hal_gremlin.py
it should give you the directory that you must change in ncam_setup

Please tell me what is your linux distro
Fern

Please Log in to join the conversation.

Time to create page: 0.173 seconds
Powered by Kunena Forum