NativeCAM is Features renamed

More
9 years 5 months ago #93472 by FernV
Replied by FernV on topic NativeCAM not loading into LinuxCNC

Transistor wrote: ...The X and Y axis got swapped


Have you pushed the wrong button ?

Attachment not found



Fern

Please Log in to join the conversation.

More
9 years 5 months ago #93490 by Transistor
Replied by Transistor on topic NativeCAM not loading into LinuxCNC
Hah!, but no! It's incorrect when I use the keyboard jog. Cursor key left / right should move the X-axis. (It did before and does when I restore my original setup.
I'll sort it out next weekend. Thanks.

Please Log in to join the conversation.

More
9 years 5 months ago #93757 by Transistor
Replied by Transistor on topic NativeCAM is Features renamed
Hi, Fern.
I can't seem to get this to work. I started again and had AXIS running properly. Here's what I did next:

- Extract NativeCAM download to my home folder. This will install a folder NativeCAM-master.
- For some reason the unzip creates ~/NativeCAM-master/NativeCAM-master/. I moved the inner one up to ~/ to keep the file paths shorter.
- Go to ~/NativeCAM-master and double-click on ncam.py. It will install the NativeCAM application in standalone mode and open it up.
- Open a Terminal window.
Code:
cd ~/NativeCAM-master sudo ./ncam.py -i ~/PathTo/MyMillIniFileName.ini -c mill
- Start AXIS pointing it to my ia-mill.ini.

LinuxCNC Errors (abbreviated)
Code:
Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/share/linuxcnc/tcl/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.5 LINUXCNC - 2.7.0 Machine configuration directory is '/home/cnc1/linuxcnc/configs/ia-mill' Machine configuration file is 'ia-mill.ini' INIFILE=/home/cnc1/linuxcnc/configs/ia-mill/ia-mill.ini PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI= DISPLAY=axis Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Found file(REL): ./ia-mill.hal Found file(REL): ./custom.hal INFO CLASSICLADDER- No ladder GUI requested-Realtime runs till HAL closes. Starting TASK program: milltask Starting DISPLAY program: axis Embeded tab command "halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -x 54526096 -U --catalog=mill /home/cnc1/NativeCAM-master/ncam.ui" exited with error: 1 Shutting down and cleaning up LinuxCNC... Killing task linuxcncsvr, PID=7187 Killing task milltask, PID=7228 task: 341 cycles, min=0.000028, max=0.022104, avg=0.009514, 0 latency excursions (> 10x expected cycle time of 0.010000s) Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: . Traceback (most recent call last): File "/usr/bin/gladevcp", line 45, in <module> import gladevcp.makepins File "/usr/lib/pymodules/python2.7/gladevcp/__init__.py", line 1, in <module> from hal_pythonplugin import * File "/usr/lib/pymodules/python2.7/gladevcp/hal_pythonplugin.py", line 1, in <module> from ncam import NCam ImportError: No module named ncam <commandline>:0: waitpid failed gladevcp gladevcp <commandline>:0: gladevcp exited without becoming ready 7187 PID TTY STAT TIME COMMAND 7228 PID TTY STAT TIME COMMAND Stopping realtime threads Unloading hal components Kernel message information:

Any ideas? This all seems a bit more difficult than it should be!

Please Log in to join the conversation.

More
9 years 5 months ago #93764 by FernV
Replied by FernV on topic NativeCAM is Features renamed

Transistor wrote: Hi, Fern.
I can't seem to get this to work. I started again and had AXIS running properly. Here's what I did next:

- Extract NativeCAM download to my home folder. This will install a folder NativeCAM-master.

DO NOT EXTRACT...
Instead open a terminal in ~
and use : git clone github.com/FernV/NativeCAM.git

Transistor wrote: - For some reason the unzip creates ~/NativeCAM-master/NativeCAM-master/. I moved the inner one up to ~/ to keep the file paths shorter.
- Go to ~/NativeCAM-master and double-click on ncam.py. It will install the NativeCAM application in standalone mode and open it up.
- Open a Terminal window.

Code:
cd ~/NativeCAM-master sudo ./ncam.py -i ~/PathTo/MyMillIniFileName.ini -c mill

NEVER USE 'sudo' with ncam.py, it will create directories where you only have read permissions

Erase ~/NativeCAM-master and everything you created with those commands and follow the instructions.
All in a normal user terminal in your home directory

1- clone with : git clone github.com/FernV/NativeCAM.git
2- cd NativeCAM
3- ./ncam.py to make sure it runs stand alone and no package is missing, you can delete ~/nativecam directory later
4- close nativecam

I RECOMMEND THAT YOU NOW RUN : sudo ./nondeb_setup.py c
THEN ISSUE THIS COMMAND : sudo ./nondeb_setup.py

Try : linuxcnc /home/cnc1/NativeCAM/configs/sim/axis/ncam_demo/mill.ini
This will start linuxcnc with nativecam embedded

When satisfied, convert your inifile with this command from ~/NativeCAM directory :
./ncam.py -i /home/cnc1/linuxcnc/configs/ia-mill/ia-mill.ini
A backup ia-mill.ini.bak will be created.

Run linuxcnc normally using : linuxcnc /home/cnc1/linuxcnc/configs/ia-mill/ia-mill.ini

Fern

Please Log in to join the conversation.

More
9 years 5 months ago #93820 by Transistor
Replied by Transistor on topic NativeCAM is Features renamed
Thank you very much for your help. I've followed your instructions exactly and am almost there.

linuxcnc /home/cnc1/NativeCAM/configs/sim/axis/ncam_demo/mill.ini
This second-last starts AXIS with the NativeCAM panel.

cnc1@CNCPC:~/NativeCAM$ linuxcnc /home/cnc1/linuxcnc/configs/ia-mill/ia-mill.ini
Code:
LINUXCNC - 2.7.0 Machine configuration directory is '/home/cnc1/linuxcnc/configs/ia-mill' Machine configuration file is 'ia-mill.ini' Starting LinuxCNC... . Found file(REL): ./ia-mill.hal Found file(REL): ./custom.hal INFO CLASSICLADDER- No ladder GUI requested-Realtime runs till HAL closes. NativeCAM info: inifile = /home/cnc1/linuxcnc/configs/ia-mill/ia-mill.ini NCAM_DIR = /home/cnc1/linuxcnc/configs/ia-mill/ncam SYS_DIR = /home/cnc1/NativeCAM program = /usr/lib/pymodules/python2.7/gladevcp/ncam.py Waiting for component 'gladevcp' to become ready........................................................Traceback (most recent call last): File "/usr/lib/pymodules/python2.7/gladevcp/ncam.py", line 2040, in __init__ self.update_user_tree(fromdirs, NCAM_DIR) File "/usr/lib/pymodules/python2.7/gladevcp/ncam.py", line 2248, in update_user_tree os.symlink(os.path.join(SYS_DIR, s), srcdir) OSError: [Errno 17] File exists ...Xlib.protocol.request.QueryExtension Xlib.protocol.request.QueryExtension .RTAPI: ERROR: Unexpected realtime delay on task 1 This Message will only display once per session. Run the Latency Test and resolve before continuing. Unexpected realtime delay: check dmesg for details.

This starts AXIS but without the NativeCAM panel.

Can you spot my error?

Thanks again.

Please Log in to join the conversation.

More
9 years 5 months ago #93826 by FernV
Replied by FernV on topic NativeCAM is Features renamed
From '/home/cnc1/linuxcnc/configs/ia-mill/ncam' delete 'cfg', 'graphics' and 'lib' subdirs/links
Sometimes it fails to delete old stuff, I have to find out why but the cause may be you started ./ncam.py with a 'sudo' command before.

Restart lcnc with : linuxcnc /home/cnc1/linuxcnc/configs/ia-mill/ia-mill.ini

Fern

Please Log in to join the conversation.

More
9 years 5 months ago #93861 by Transistor
Replied by Transistor on topic NativeCAM is Features renamed

From '/home/cnc1/linuxcnc/configs/ia-mill/ncam' delete 'cfg', 'graphics' and 'lib' subdirs/links

Done + a few more that I found.

linuxcnc /home/cnc1/linuxcnc/configs/ia-mill/ia-mill.ini

NativeCAM error popup:
Code:
Error creating link : /home/cnc1/NativeCAM/examples/mill -> /home/cnc1/linuxcnc/configs/ia-mill/ncam/catalogs/mill/projects/examples Code : [Errno 13] Permission denied

followed by another:
Code:
Error creating link : /home/cnc1/NativeCAM/examples/plasma -> /home/cnc1/linuxcnc/configs/ia-mill/ncam/catalogs/plasma/projects/examples Code : [Errno 13] Permission denied

Then AXIS opens without NativeCAM.

Terminal output:
Code:
LINUXCNC - 2.7.0 Machine configuration directory is '/home/cnc1/linuxcnc/configs/ia-mill' Machine configuration file is 'ia-mill.ini' Starting LinuxCNC... . Found file(REL): ./ia-mill.hal Found file(REL): ./custom.hal INFO CLASSICLADDER- No ladder GUI requested-Realtime runs till HAL closes. NativeCAM info: inifile = /home/cnc1/linuxcnc/configs/ia-mill/ia-mill.ini NCAM_DIR = /home/cnc1/linuxcnc/configs/ia-mill/ncam SYS_DIR = /home/cnc1/NativeCAM program = /usr/lib/pymodules/python2.7/gladevcp/ncam.py Waiting for component 'gladevcp' to become ready......................................................................................................................................................................................... [AXIS is running and then quit] Traceback (most recent call last): File "/usr/lib/pymodules/python2.7/gladevcp/ncam.py", line 2040, in __init__ self.update_user_tree(fromdirs, NCAM_DIR) File "/usr/lib/pymodules/python2.7/gladevcp/ncam.py", line 2248, in update_user_tree . os.symlink(os.path.join(SYS_DIR, s), srcdir) OSError: [Errno 13] Permission denied .Xlib.protocol.request.QueryExtension .Xlib.protocol.request.QueryExtension . /usr/bin/gladevcp:295: GtkWarning: GdkWindow 0x2a00148 unexpectedly destroyed gtk.main() Shutting down and cleaning up LinuxCNC... **** GLADE VCP ERROR: X Protocol Error: 3 task: 29496 cycles, min=0.000027, max=0.025417, avg=0.010241, 0 latency excursions (> 10x expected cycle time of 0.010000s)

Thanks again.

Please Log in to join the conversation.

More
9 years 5 months ago #93864 by FernV
Replied by FernV on topic NativeCAM is Features renamed
Your errors : Code : [Errno 13] Permission denied
are the result from running : 'sudo ./ncam.py'

The directory : /home/cnc1/linuxcnc/configs/ia-mill/ncam
is owned by the superuser
You will have to delete it with : sudo rmdir /home/cnc1/linuxcnc/configs/ia-mill/ncam

You should not have any problems with /home/cnc1/NativeCAM directory

Then restart : linuxcnc /home/cnc1/linuxcnc/configs/ia-mill/ia-mill.ini

Fern

Please Log in to join the conversation.

More
9 years 4 months ago #94080 by Transistor
Replied by Transistor on topic NativeCAM is Features renamed
Hi, Fern.
I deleted all the NativeCAM folders and files, installed again as per your instructions above and it works correctly now. Thank you for your time and your excellent application.

Please Log in to join the conversation.

More
9 years 4 months ago #94239 by gmouer
Replied by gmouer on topic Ncam crashing after taking updates

Attachment not found

Hi Fern,

I have a Ncam system that has been working flawlessly for quite some time. I have NOT installed the recent updates that you released in the last month as yet.

Today, I took updates on the computer (op system and lcnc)and now Ncam/Lcnc crashes on startup. I am getting some glade errors related to NativeCam as shown in the attached screenshot. (Ignore the Hidcomp errors, I got those under control). The updates today included a update for Linuxcnc to 2.7.9 , before today the system was operating under 2.7.8 which ran fine.

Hopefully you can help me out.

Please Log in to join the conversation.

Time to create page: 0.183 seconds
Powered by Kunena Forum