NativeCAM is Features renamed

More
9 years 1 month ago #99527 by FernV
Replied by FernV on topic NativeCAM is Features renamed
Have you started linuxcnc with this command ?
$ linuxcnc /home/linuxcnc/linuxcnc/configs/test_setup/test_setup.ini

or specify a relative path for the inifile

Fern

Please Log in to join the conversation.

More
9 years 1 month ago #99530 by vmihalca
Replied by vmihalca on topic NativeCAM is Features renamed
I have started it by clicking the link I had on the desktop. I thought that's using the updated ini file.
I'll run it as you said and let you know! :)
Thanks for your support!

Please Log in to join the conversation.

More
9 years 1 month ago #99538 by alexian79
Replied by alexian79 on topic NativeCAM is Features renamed
Hi guys, It looks like I have the same error. I installed everything from deb package.

gladevcp: importing: /usr/share/linuxcnc/aux_gladevcp/NativeCAM/ncam.py
/usr/share/linuxcnc/aux_gladevcp/NativeCAM/ncam.py:2442: GtkWarning: IA__gtk_accel_label_set_accel_closure: assertion `gtk_accel_group_from_accel_closure (accel_closure) != NULL' failed
mi = _action.create_menu_item()
Previous work not saved as current work
/usr/bin/gladevcp:185: GtkWarning: GtkSpinButton: setting an adjustment with non-zero page size is deprecated
builder.add_from_file(xmlname)
**** probe_screen GETINIINFO ****
Preference file path: /home/alexian79/linuxcnc/configs/mach3bob/mach3bob.pref
Xlib.protocol.request.QueryExtension
Xlib.protocol.request.QueryExtension


/usr/bin/gladevcp:295: GtkWarning: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 15
gtk.main()
HAL: ERROR: duplicate component name 'gladevcp'
*** GLADE VCP ERROR: Asking for a HAL component using a name that already exists.

Please Log in to join the conversation.

More
9 years 1 month ago #99552 by FernV
Replied by FernV on topic NativeCAM is Features renamed

alexian79 wrote: /usr/share/linuxcnc/aux_gladevcp/NativeCAM/ncam.py:2442: GtkWarning: IA__gtk_accel_label_set_accel_closure: assertion `gtk_accel_group_from_accel_closure (accel_closure) != NULL' failed
mi = _action.create_menu_item()

Previous warning is from a pygtk bug and only affect some menu accelerators, never pay attention to this

/usr/bin/gladevcp:185: GtkWarning: GtkSpinButton: setting an adjustment with non-zero page size is deprecated
builder.add_from_file(xmlname)
**** probe_screen GETINIINFO ****
Preference file path: /home/alexian79/linuxcnc/configs/mach3bob/mach3bob.pref
Xlib.protocol.request.QueryExtension
Xlib.protocol.request.QueryExtension


/usr/bin/gladevcp:295: GtkWarning: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 15
gtk.main()
HAL: ERROR: duplicate component name 'gladevcp'
*** GLADE VCP ERROR: Asking for a HAL component using a name that already exists.

Looks like you are trying to load a new file with gladevcp. I do not think your error to be related to NativeCAM. You could post your inifile.

When testing NativeCAM, you should try the included demos first and make sure everything is fine before integrating with your setup.

Attachment not found



Fern

Please Log in to join the conversation.

More
9 years 1 month ago #99553 by FernV
Replied by FernV on topic NativeCAM is Features renamed

vmihalca wrote: I have started it by clicking the link I had on the desktop. I thought that's using the updated ini file.

It should but I also recommend you try the demos.

If you still have problems, delete '/home/linuxcnc/linuxcnc/configs/test_setup/test_setup.ini' and rename your backup '/home/linuxcnc/linuxcnc/configs/test_setup/test_setup.ini.bak' to '/home/linuxcnc/linuxcnc/configs/test_setup/test_setup.ini'
then run $ ncam -c lathe -i /home/linuxcnc/linuxcnc/configs/test_setup/test_setup.ini
without the -t option

then try $ linuxcnc /home/linuxcnc/linuxcnc/configs/test_setup/test_setup.ini

It would also be helpful to post the inifiles your try

Fern

Please Log in to join the conversation.

More
9 years 1 month ago #99562 by BigDo
Replied by BigDo on topic NativeCAM is Features renamed
Hi Fern,

i have created some icons for the lathe-menu and also edited the menu.xml
Code:
<ncam_ui> <menu> <menu action='tools' name=_("Tool")_ icon="lathe-tool.png"> <menuitem action='ch_tool' name=_("Change Cutter")_ tool_tip= _("Change cutter")_ icon="lathe-tool-change.png" src="lathe/tool-change.cfg"/> </menu> <menu action='cutting' name=_("Cutting")_ icon="threading.png"> <menuitem action='boring' name=_("Boring")_ tool_tip= _("Boring")_ icon="lathe-surface-id.png" src="lathe/boring.cfg"/> <menuitem action='turning' name=_("Turning")_ tool_tip= _("Turning")_ icon="lathe-surface.png" src="lathe/turning.cfg"/> <menuitem action='parting' name=_("Parting")_ tool_tip= _("Parting")_ icon="lathe-depth-step.png" src="lathe/parting.cfg"/> <menuitem action='facing' name=_("Facing")_ tool_tip= _("Cut face")_ icon="lathe-facing.png" src="lathe/facing.cfg"/> <menuitem action='threading' name=_("Threading")_ tool_tip= _("Threading")_ icon="threading.png" src="lathe/threading.cfg"/> <menuitem action='radius_od' name=_("Radius OD")_ tool_tip= _("Radius OD")_ icon="lathe-half-ball-od.png" src="lathe/radius_od.cfg"/> <menuitem action='radius_id' name=_("Radius ID")_ tool_tip= _("Radius ID")_ icon="lathe-half-ball-id.png" src="lathe/radius.cfg"/> <menuitem action='taper_ida' name=_("Taper IDA")_ tool_tip= _("inside diameter taper")_ icon="lathe-taper_ida.png" src="lathe/taper_ida.cfg"/> <menuitem action='taper_idl' name=_("Taper IDL")_ tool_tip= _("Inside taper by length and small/large diameter/radius")_ icon="lathe-taper-idl.png" src="lathe/taper_idl.cfg"/> <menuitem action='taper_idla' name=_("Taper IDLA")_ tool_tip= _("Taper IDLA")_ icon="lathe-taper-idla.png" src="lathe/taper_idla.cfg"/> <menuitem action='taper_oda' name=_("Taper ODA")_ tool_tip= _("Taper ODA")_ icon="lathe-taper-oda.png" src="lathe/taper_oda.cfg"/> <menuitem action='taper_odl' name=_("Taper ODL")_ tool_tip= _("Taper ODL")_ icon="lathe-taper-odl.png" src="lathe/taper_odl.cfg"/> <menuitem action='taper_odla' name=_("Taper ODLA")_ tool_tip= _("Taper ODLA")_ icon="lathe-taper-odla.png" src="lathe/taper_odla.cfg"/> </menu> <menu action='misc' name=_('Miscellaneous')_ icon='misc.png'> <menuitem action='group_std' name=_('Standard Group')_ tool_tip=_('Group subroutines')_ icon="group.png" src="group.cfg"/> <menuitem action='gcode_file' name=_('Insert a G Code File')_ tool_tip= _('Include a custom gcode file')_ icon="file-gcode.png" src="i_gcode.cfg"/> <menuitem action='gcode' name=_('Custom G Code')_ tool_tip= _('Write custom gcode')_ icon="gcode.png" src="gcode.cfg"/> <menuitem action='stock' name=_('Material')_ tool_tip=_('Group subroutines')_ icon="group.png" src="lathe/material.cfg"/> </menu> </menu> <toolbar> <toolitem action='ch_tool' /> <separator/> <toolitem action='facing' /> <toolitem action='turning' /> <toolitem action='boring' /> <toolitem action='parting' /> <toolitem action='radius_od' /> <toolitem action='radius_id' /> <toolitem action='taper_ida' /> <toolitem action='taper_idla' /> <toolitem action='taper_idl' /> <toolitem action='taper_oda' /> <toolitem action='taper_odl' /> <toolitem action='taper_odla' /> <toolitem action='threading' /> <toolitem action='group_std' /> <separator/> <toolitem action='gcode' /> <toolitem action='gcode_file' /> </toolbar > </ncam_ui>

use it if you want.

Niko

Please Log in to join the conversation.

More
9 years 1 month ago #99563 by BigDo
Replied by BigDo on topic NativeCAM is Features renamed
more icons :)

Please Log in to join the conversation.

More
9 years 1 month ago #99564 by FernV
Replied by FernV on topic NativeCAM is Features renamed
Hi Niko,

These are very nice and will be used for sure. However it should be added to icons.svg and saved with the project. Could you send the svg file or send a pull request on github ?

Regards
Fern

Please Log in to join the conversation.

More
9 years 1 month ago #99584 by BigDo
Replied by BigDo on topic NativeCAM is Features renamed
Fern you need all the icons in one svg file?

Regards

Niko

Please Log in to join the conversation.

More
9 years 1 month ago #99585 by FernV
Replied by FernV on topic NativeCAM is Features renamed

BigDo wrote: Fern do you want all icons in one svg file?

As simple it is for you

Fern

Please Log in to join the conversation.

Time to create page: 0.164 seconds
Powered by Kunena Forum