NCam : Can not enter float values after update to latest deb

You should be able to update now

I used it for days without issue, let me know if you do have some

Fern

Fern and Norbert
all it's ok, now the calculator works fine.
Thank you!

Hallo Fern,

you changes did solve the problem of the decimal separator with German Localization, but the "Pi" problem is still there.

If I push Pi, the display of the calculator shows Pi, if I then press "=" I get 314159265359,000
I I press enter, the value is concerted to be "25399997,460"

But I expected to get something like 3.14159....
That happens, because math(Pi) does return a dot separated value, nevertheless what localization you have.

That is why i changed the conversion to be

temp = temp.replace('Pi', str(math.pi).replace(".",decimal_point))

Norbert

Hallo Floris,

have you tried the Pi part?

Norbert

This is really strange because even on your pc locale.atof('2.5') returned 2.5 the right value.

It will be changed tonight.

Fern

Hi Norbert,

I was finally able to reproduce your issue. I had to use :
export LANG='de_DE'
run the test and locale.atof('2.5') finally resulted in 25.000

de_DE and fr_CA both use ',' for decimal separator and this issue never occured on my pc's as
locale.atof('2.5') always resulted in 2.500

Fern