Nativecam taper/cone not working

More
7 years 9 months ago #123214 by chrisfairbrother
Nativecam taper/cone not working was created by chrisfairbrother
Hi Fern, I spotted the taper/cone is now included in Ncam 0.1.14b. I have tried both taper and cone; these produce code but nothing in the preview window. Running gmoccapy 2.3.4 on master 2.8.0.
If you need the produced code or any testing, let me know.
Chris

Please Log in to join the conversation.

More
7 years 9 months ago #123238 by FernV
Replied by FernV on topic Nativecam taper/cone not working
Hi Chris

It has not been included in last release and will be later but not on the next one, sorry

Fern

Please Log in to join the conversation.

More
7 years 9 months ago #123269 by chrisfairbrother
Replied by chrisfairbrother on topic Nativecam taper/cone not working
Ok no problem. Thank you.

Please Log in to join the conversation.

Time to create page: 0.209 seconds
Powered by Kunena Forum