CSS below 100 not possible

More
7 years 9 months ago #123344 by mydani
CSS below 100 not possible was created by mydani
Hello all (Ferm),

when trying to enter a CSS less than 100 for turning, it is automatically set to a minimum of 100.
Is this intended?

streamable.com/8exq5

Regards,
Daniel

Please Log in to join the conversation.

More
7 years 9 months ago #123365 by FernV
Replied by FernV on topic CSS below 100 not possible
Hi Dan,

Right click on the parameter/field and select 'Change to gcode'. You will be able to enter anything you like

Fern

Please Log in to join the conversation.

More
7 years 9 months ago #123621 by andypugh
Replied by andypugh on topic CSS below 100 not possible
100 as a minimum seems too high. Especially if using high-speed steel tooling.
I don't often go as high as 100, in fact, in metric units.

Please Log in to join the conversation.

Time to create page: 0.117 seconds
Powered by Kunena Forum