NativeCAM + dogbones

robertspark
Topic Author
Offline
Platinum Member

5 years 7 months ago #201273 by robertspark

NativeCAM + dogbones was created by robertspark

I've not seen it but was wondering if NativeCAM offered the option of cutting dogbones with pockets and profiles?

aide in joint fitting?

how may one go about adding them to a sequence of operations?

blog.bricsys.com/wp-content/uploads/2020/10/Fillet_Issues.gif

Please Log in to join the conversation.

FernV
Offline
Platinum Member

5 years 7 months ago #201567 by FernV

Replied by FernV on topic NativeCAM + dogbones

Hi

If you can write the code yourself for this, you can insert it with 'Misc/Insert a gcode file'

Regards
Fern

Please Log in to join the conversation.

robertspark
Topic Author
Offline
Platinum Member

5 years 7 months ago #201569 by robertspark

Replied by robertspark on topic NativeCAM + dogbones

thanks

will give it a go

Please Log in to join the conversation.

Time to create page: 0.183 seconds