PathPilot controlled lathe toolchanger

More
8 years 6 months ago #109249 by Iron-Man
Replied by Iron-Man on topic PathPilot controlled lathe toolchanger
Updates reported EMCO Tool changer;
www.cnczone.com/forums/benchtop-machines/261754-cnc-3.html

Iron-Man

Please Log in to join the conversation.

More
6 years 9 months ago #155504 by Iron-Man
Replied by Iron-Man on topic PathPilot controlled lathe toolchanger
Hello micknucam !

I just wanted to know if you can share your PIC code for the tool changer?

Thanks,

Iron-Man

Please Log in to join the conversation.

More
6 years 9 months ago #155531 by micknucam
Replied by micknucam on topic PathPilot controlled lathe toolchanger
Yes No problem

Please Log in to join the conversation.

More
6 years 9 months ago #155532 by micknucam
Replied by micknucam on topic PathPilot controlled lathe toolchanger
Here are the files in various version, the hex file is here just changed the .txt to .hex.

Don't for get i use 4 bits to check the tool position, these are hall effect devices and small magnets 3 bits for 8 tools and a in position bit


Any Problems


Let Me Know

Mike

Please Log in to join the conversation.

More
6 years 9 months ago #155549 by Iron-Man
Replied by Iron-Man on topic PathPilot controlled lathe toolchanger
Hello Mike

I finally found a "BACK" Turret that just may work without to many modifications.

Thanks !!

Iron-Man

Please Log in to join the conversation.

More
6 years 6 months ago #164897 by smgvbest
Replied by smgvbest on topic PathPilot controlled lathe toolchanger
I've been away for some time but if you truly want this transparent then you need to replicate the toolchanger hardware and not touch the PP code at all.

this is not hard to do. look at the zbot code and you can reverse if from there.

Please Log in to join the conversation.

More
6 years 6 months ago #164917 by Iron-Man
Replied by Iron-Man on topic PathPilot controlled lathe toolchanger
Hello smgvbest !!

Do you have a link to this "zbot' code?

Thanks,

Iron-Man

Please Log in to join the conversation.

More
5 years 11 months ago #189938 by Iron-Man
Replied by Iron-Man on topic PathPilot controlled lathe toolchanger
Hello All !!

Can anyone point me to " zbot code " and you can reverse if from there"

Thanks,

Iron-Man

Please Log in to join the conversation.

More
5 years 11 months ago #189939 by Iron-Man
Replied by Iron-Man on topic PathPilot controlled lathe toolchanger

micknucam wrote: Here are the files in various version, the hex file is here just changed the .txt to .hex.

Don't for get i use 4 bits to check the tool position, these are hall effect devices and small magnets 3 bits for 8 tools and a in position bit


Any Problems


Let Me Know

Mike


Hello micknucam !!

Can you post your pathpilot files showing your toolchanger interface to pathpilot ?

Thanks,

Iron-Man

Please Log in to join the conversation.

More
5 years 11 months ago #190622 by micknucam
Replied by micknucam on topic PathPilot controlled lathe toolchanger
Hello IronMan

Sorry for late reply been ill with the corvid bug !

I will sort them out for you I don’t use the turret ! I will get the files off my mate george! There’s also a bit file that has a pwm output.

Please Log in to join the conversation.

Time to create page: 0.391 seconds
Powered by Kunena Forum