Use of wizards/conversational with standard LCNC

I have been discussing this with a friend for a while. What would it take to use the pathpilot wizards with the standard LCNC release (2.7). I recall seeing something that the graphics are copyrighted but other than that, what would it take?

Are the wizards normal NCGGUI routines?

very quickly , the answers probaly quite a lot of work unfortunatly .
they are embedded into the python gui code , rather than NGCGUI . as well as ngc files

the actual graphics are not the main problem , i have that just about covered

sarah

Thanks much for the info ! I guess I will have to go with a full pathfinder install it appears. I would have rather stuck with mainstream LCNC. The conversational part of pathfinder was the only part that really appealed to me.

George

gmouer wrote: The conversational part of pathfinder was the only part that really appealed to me.

Have you seen:

Yes indeed, I have seen "features" !! A friend and myself have been watching it closely and really want to try it but neither of us have been able to find it nor any instructions for installing it. The install instructions we found are mostly all old broken links.

Linuxcnc Forum: linuxcnc-features-a-kind-of-ngcgui

Here is the link and FernV has a page where you can download it and install it. I currently am using this version as well as many others.

Here is his page with install instructions:

fernv.github.io/linuxcnc-features/

Please note :
this is meant to be installed to Axis gui under linuxcnc , this will not install directly to Pathpilot a totally different GUI .