How to change the Pathpilot default g-code folder

Does anyone know how to change the default G-code folder

by default this is set to home/operator/g-code

I would like to change it to another drive and folder.

I've searched all over to tried to find some ini with the g-code path but can't find one.

In your ini file in the [DISPLAY] section
linuxcnc.org/docs/html/config/ini-config.html#_display_section
Should be a line:
PROGRAM_PREFIX = ~/linuxcnc/nc_files
That is the default path for your ngc files.