Pathpilot with 6i25 and 7i77 for AC servos in Analog mode

Was wondering if anyone had setup to run pathpilot using the 6i25 and 7i77 with ac servos in analog feedback mode? or if they see any issues with that? getting close on my VMC to Linux Conversion with these cards and trying to see what it will take to be able to use PathPilot..

Thanks in advance!

Chris

No one? yikes.. hope is dimishing..

can't help with the files but do you have it working without pathpilot? if so you should be able to get it working with pathpilot.

smgvbest wrote: can't help with the files but do you have it working without pathpilot? if so you should be able to get it working with pathpilot.

Not yet still working on the wiring of everything.. but once it's up and running I will report back for input on the transition to pathpilot!!

Thanks guys!

Chris

Lcvette wrote: Was wondering if anyone had setup to run pathpilot using the 6i25 and 7i77 with ac servos in analog feedback mode? or if they see any issues with that? getting close on my VMC to Linux Conversion with these cards and trying to see what it will take to be able to use PathPilot..

Thanks in advance!

Chris

Chris I have converted a Denford NovaTurn; Yaskawa Servos, 6i25 + 7i77, AMD Gizmosphere, +-10V closed loop Torque mode.
Running PathPilot.
Search Denford NovaTurn.

www.cnczone.com/forums/benchtop-machines/261754-cnc.html

www.denfordata.com/bb/viewtopic.php?f=42&t=4789

Hope this helps,

Iron-Man

Iron-Man wrote:

Lcvette wrote: Was wondering if anyone had setup to run pathpilot using the 6i25 and 7i77 with ac servos in analog feedback mode? or if they see any issues with that? getting close on my VMC to Linux Conversion with these cards and trying to see what it will take to be able to use PathPilot..

Thanks in advance!

Chris

Chris I have converted a Denford NovaTurn; Yaskawa Servos, 6i25 + 7i77, AMD Gizmosphere, +-10V closed loop Torque mode.
Running PathPilot.
Search Denford NovaTurn.

www.cnczone.com/forums/benchtop-machines/261754-cnc.html

www.denfordata.com/bb/viewtopic.php?f=42&t=4789

Hope this helps,

Iron-Man

Iron-Man,

That's excellent news, going to check out your build now!!!! Very exciting!!! Thank you for posting that up!!

Chris