How to make the USB I/O turn off relays on M30 or Estop?

andypugh
Offline
Administrator

7 years 9 months ago #124938 by andypugh

Replied by andypugh on topic How to make the USB I/O turn off relays on M30 or Estop?

smgvbest wrote: In the Pathpilot postgui hal file the USBIO pins are defined as

Code:

# USBIO net usbio-enabled tormach.usbio-enabled => usbio.enabled net dig-out-0 tormach.usbio-output-0

So, edit that file to look like

Code:

loadrt and2 count=16
addf and2.0 servo-thread
addf and2.1 servo-thread 
addf and2.2 servo-thread
addf and2.3 servo-thread 
addf and2.4 servo-thread
addf and2.5 servo-thread 
addf and2.6 servo-thread
addf and2.7 servo-thread
addf and2.8 servo-thread
addf and2.9 servo-thread 
addf and2.10 servo-thread
addf and2.11 servo-thread 
addf and2.12 servo-thread
addf and2.13 servo-thread
addf and2.14 servo-thread
addf and2.15 servo-thread 

net running halui.program-is-running
net running and2.0in0 and2.1.in0 and2.2.in0 and2.3.in0
net running and2.4.in0 and2.5.in0 and2.6.in0 and2.7.in0
net running and2.8.in0 and2.9.in0 and2.10.in0 and2.11.in0
net running and2.12.in0 and2.13.in0 and2.14.in0 and2.15.in0

net dig-out-1 and2.0.in1
net dig-out-1-latched and2.0.out => tormach.usbio-output-0
net dig-out-2 and2.1.in1
net dig-out-1-latched and2.1.out => tormach.usbio-output-1
net dig-out-3 and2.2.in1
net dig-out-1-latched and2.2.out => tormach.usbio-output-2
net dig-out-4 tand2.3.in1
net dig-out-1-latched and2.3.out => tormach.usbio-output-3
net dig-out-5 and2.4.in1
net dig-out-1-latched and2.4.out => tormach.usbio-output-4
net dig-out-6 and2.5.in1
net dig-out-1-latched and2.5.out => tormach.usbio-output-5
net dig-out-7 and2.6.in1
net dig-out-1-latched and2.6.out => tormach.usbio-output-6
net dig-out-8 and2.7.in1
net dig-out-1-latched and2.7.out => tormach.usbio-output-7
net dig-out-9 and2.8.in1
net dig-out-1-latched and2.8.out => tormach.usbio-output-8
net dig-out-10 and2.9.in1
net dig-out-1-latched and2.9.out => tormach.usbio-output-9
net dig-out-11 and2.10.in1
net dig-out-1-latched and2.10.out => tormach.usbio-output-10
net dig-out-12 and2.11.in1
net dig-out-1-latched and2.11.out => tormach.usbio-output-11
net dig-out-13 and2.12.in1
net dig-out-1-latched and2.12.out => tormach.usbio-output-12
net dig-out-14 and2.13.in1
net dig-out-1-latched and2.13.out => tormach.usbio-output-13
net dig-out-15 and2.14.in1
net dig-out-1-latched and2.14.out => tormach.usbio-output-14
net dig-out-15 and2.15.in1
net dig-out-1-latched and2.14.out => tormach.usbio-output-15

Please Log in to join the conversation.

jwatte
Topic Author
Offline
New Member

7 years 9 months ago #124979 by jwatte

Replied by jwatte on topic How to make the USB I/O turn off relays on M30 or Estop?

Thanks for the suggestions! I'll compare this to the "status polling Python" option, and see what I come up with.

FWIW, the "configs" live in the v2.1.6/configs/tormach_mill files, and each new update creates a new v2.x.y directory and re-links the "tmc" symlink to that new directory. Perhaps the updater copies over the old configs verbatim? We shall see.

Please Log in to join the conversation.

Time to create page: 0.771 seconds