Is there an easy way to swop profiles under PP?

7 years 3 months ago #139809 by belli

Is there an easy way to swop profiles under PP? was created by belli

I have loaded a 440 profile on my PC and now wish to use it on my 1100 machine, is there an easy way to swop this without having to reload PP?

Please Log in to join the conversation.

7 years 3 months ago #139816 by Todd Zuercher

Replied by Todd Zuercher on topic Is there an easy way to swop profiles under PP?

I don't use PP myself so have no idea, but if you don't get an answer here, try shooting the people at Tormach an email. They'd probably help you.

Please Log in to join the conversation.

7 years 3 months ago #139821 by belli

Replied by belli on topic Is there an easy way to swop profiles under PP?

None of my machines are actually a Tormach...

Please Log in to join the conversation.

7 years 3 months ago #139950 by davidimurray

Replied by davidimurray on topic Is there an easy way to swop profiles under PP?

If using PP2 then the config is set in the pathpilot.json file - you can set the ini file in there and also mill/turn etc.

Please Log in to join the conversation.

Time to create page: 0.085 seconds