Pathpilot pendant

Are there any pathpilot pendant other than ShuttleXpress?

Pretty much any that works with LinuxCNC. you need to Component and setup for it but that's really all there is

you do need the component compiled at the same OS and LinuxCNC version as Pathpilot though that is a limit to keep in mind

Tried to make a self-made control panel. It turned out 16 buttons, three turn switches, mpg wheel, hat-switch for quick movement for lathe.On buttons you can visit any buttons in Pathpilot. MPG moves four axes and serves to adjust the speed of movement, changes spindle, processing speed and TD.The program is written for Stm32 Board. Driven through the hidcomp component.