Bit File for 7i76e

More
5 years 5 months ago #208837 by davidimurray
Bit File for 7i76e was created by davidimurray
Hi All

Looking to start setting up my 7i76e with pathpilot. Does anyone know what would be the correct bit file to use to get the full I/O i.e mode 2?

Thanks

Dave

Please Log in to join the conversation.

More
5 years 5 months ago #208862 by PCW
Replied by PCW on topic Bit File for 7i76e
Standard firmware should be fine
SSerial modes are set in the hal file

Please Log in to join the conversation.

More
5 years 5 months ago #208896 by davidimurray
Replied by davidimurray on topic Bit File for 7i76e
Thanks PCW.

Do you know which bit file is the standard firmware? I’ve downloaded the pack from the mesanet site but there are a few different versions for the 7i76 in there.

Thanks

Dave

Please Log in to join the conversation.

More
5 years 5 months ago #208937 by PCW
Replied by PCW on topic Bit File for 7i76e
The standard firmware is pre-loaded in the 7I76E
the bitfile would be 7i76e_7i76x1d.bit

Please Log in to join the conversation.

More
5 years 5 months ago #208959 by davidimurray
Replied by davidimurray on topic Bit File for 7i76e
Thanks PCW - now to have a go at getting it working with PP.

I take it nobody has found a way to disable the bit file loading?

Cheers

Dave

Please Log in to join the conversation.

More
5 years 4 months ago #211117 by yodaddy
Replied by yodaddy on topic Bit File for 7i76e
To avoid bitfile overwriting you need to edit your base or specific .ini file in ~/tmc/configs/tormach_mill and set "BITFILE0=mesa/7i76e_7i76x1D.bit", or whichever 7i76 bitfile you want to use.

Please Log in to join the conversation.

More
5 years 4 months ago #211655 by crowloy
Replied by crowloy on topic Bit File for 7i76e
or symbolicily link the file to the default bitfile so no changes needed to the ini

Please Log in to join the conversation.

Time to create page: 0.079 seconds
Powered by Kunena Forum