Tormach Released Control Baoard Schematics and Firmware Still Waiting VFD Files!

More
4 years 9 months ago #232991 by Iron-Man
Replied by Iron-Man on topic Tormach Released Control Baoard Schematics and Firmware Still Waiting VFD Files!
That's a nice set up !!
I am waiting to hear back from Microchip about the "MPLAB PM3" . It would be nice to have a decent emulator for the PIC Micros.

Iron-Man

Please Log in to join the conversation.

More
4 years 9 months ago #232999 by smgvbest
Replied by smgvbest on topic Tormach Released Control Baoard Schematics and Firmware Still Waiting VFD Files!
Much better than me, Can see your desk much more so than you can see mine, and you're a Hakko Fan as am I and as a mater of fact the hot air station looks like the one I had before moving the Quick 861. Though for Chip Programming I one have the T56

Please Log in to join the conversation.

More
4 years 9 months ago #233014 by Iron-Man
Replied by Iron-Man on topic Tormach Released Control Baoard Schematics and Firmware Still Waiting VFD Files!
I am going over the schematic and may make these changes:
1. Change the LM25575 to reduce the part count.
2.  Add DB 25 to input, from 5i25 / 6i25.
3.  Make all unused pins on J4 available.

Iron-Man

Please Log in to join the conversation.

More
4 years 9 months ago #233349 by Rhine_Labs
Replied by Rhine_Labs on topic Tormach Released Control Baoard Schematics and Firmware Still Waiting VFD Files!
I am currently running the Quick TR1300A and the TR1100

Please Log in to join the conversation.

More
4 years 8 months ago #234218 by Iron-Man
Replied by Iron-Man on topic Tormach Released Control Baoard Schematics and Firmware Still Waiting VFD Files!
One more item that is missing from the schematic "HOST PC / STEPPER / ENCODER" are the values for inductors L1, L2, L3, L4.
This is probably not critical.

Irion-Man

Please Log in to join the conversation.

More
4 years 8 months ago #234219 by Rhine_Labs
Replied by Rhine_Labs on topic Tormach Released Control Baoard Schematics and Firmware Still Waiting VFD Files!
I think they may have released the wrong schematic or schematic for different rev?

Tormach has also went silent. I guess it is time to do a video update LOL ohh well.

Please Log in to join the conversation.

More
4 years 7 months ago #236442 by Rhine_Labs
Replied by Rhine_Labs on topic Tormach Released Control Baoard Schematics and Firmware Still Waiting VFD Files!
I did get a brief replay from Tormach CEO and then went silent again. They did release the VMC Console HID Board schematic and firmware.

I will be completing my follow up video to the 1st call out video shortly.

Please Log in to join the conversation.

More
4 years 6 months ago #241001 by Rhine_Labs
Replied by Rhine_Labs on topic Tormach Released Control Baoard Schematics and Firmware Still Waiting VFD Files!
I dumped the firmware to the missing power drawbar controller. (Tormcah Permission to Post Public they will be adding it to their git hub soon) I also received a package from Tormach I have not opened yet. Package should contain a couple boards to recover the config bits.

[img




 

Please Log in to join the conversation.

More
4 years 6 months ago #241601 by Rhine_Labs
Replied by Rhine_Labs on topic Tormach Released Control Baoard Schematics and Firmware Still Waiting VFD Files!
I finally got to opening the package from Tormach. I should have time this weekend to read the config bits.

Please Log in to join the conversation.

Time to create page: 0.311 seconds
Powered by Kunena Forum