Can I have multiple commands on one MDI line (Custom M101?)

I'd like to be able to perform several commands at once from the MDI line. 

Something like: G91 X1 ; G54 ; G90

More or less, I want a small .nc file ran, but all on one line, without having to actually manually open the .nc.

Can I get machine movement via M101, M102, etc. 

You can build a custom Mcode to run a function or you can build a Sub routine to run a function. The difference is the Mcode has to be built ahead of time as it compiles on startup and can be either Gcode based or Python script based.

The Sub can be built and called anytime .

( TP

Thanks man. I have it by typing

O<TEST> CALL

I've wanted that ability for years.

Is that the best way to go about it?

That is as good as any.

( TP