Axis screw mapping

Vmax549
Topic Author
Offline
Platinum Member

2 years 9 months ago #290003 by Vmax549

Axis screw mapping was created by Vmax549

Has anyone tried axis screw mapping in PathPilot yet?
( ;-)

Please Log in to join the conversation.

Mecanix
Offline
Platinum Member

2 years 9 months ago #290013 by Mecanix

Replied by Mecanix on topic Axis screw mapping

If PathPilot reference to the screw compensation feature of lcnc then yes, I couldn't do without it. Both accuracy and linearity yields significant improvements, borderline vital for an open loop positioning tool.

From variable backlash (depending on position), and screw error, now down to +/- 5um accuracy consistently across the-whole-screw.

Do it. Recommend.

Please Log in to join the conversation.

Time to create page: 0.072 seconds