New Laser Build - raster engraving

Guys, try the attached.  No idea if it works, but it's not giving any errors and outputs data.

I linked to a post containing absolutely everything you need, and as Andy noted, M67 should be used, not spindle stuff.

Tommy are you talking about the engravertest.zip?

Yes and no, sorry my bad, i thought i uploaded the new config there, so thank you for reminding me.
I did upload the new config there and added some more info at the top, so have a look at your own leisure.
These are also new machines i have built and use the same configs for PWM and here i did upload the new configs.
forum.linuxcnc.org/show-your-stuff/46752...ver-etcher-scratcher

Sorry about the delay. I cant upload the file because it has a sh extension. Please email me raggielyle1@gmail.com and I send the file.

raggielyle1@gmail.com wrote:

Sorry about the delay. I cant upload the file because it has a sh extension. Please email me raggielyle1@gmail.com and I send the file.
 

just change it to end in .sh.txt