Scratch Built 4x4 with Modified Toma Config (Long Post, Pic Heavy)

EDIT

tommylight wrote: Can you share the design for that table ?
Thank you.

I don't have the design for the old green table. Its long gone and I never wrote down the dimensions. For this 4x4 table I have a full parts list and dimensions for all the tubes in the description of the below video. Also a bunch of videos of my older builds on youtube.

How nice and clean, aaaaand it won't last long as clean as now.
We meant the other table, the coffee table, not the plasma cutter table, i have built plenty of those, some over 4 meters long and 2.5 meters wide. Currently finishing a plasma cnc rotary tube cutter 2 meters long and up to 300 in diameter, and another 3.7 meter wide and still not known how long but most probably 2 or 12 meters, 2 since i do not have space or 12 if i can put it outside. Totally exaggerated and useless but i need it to prove a point.

Ah ok that makes sense. I've seen some of your retrofits and other projects, stop in on your youtube from time to time. Let me dig up the design on the table. It was based on the truss table design thats been floating around the internet but I made some changes since it was a smaller scale table.

tommylight wrote: How nice and clean, aaaaand it won't last long as clean as now.
We meant the other table, the coffee table, not the plasma cutter table, i have built plenty of those, some over 4 meters long and 2.5 meters wide. Currently finishing a plasma cnc rotary tube cutter 2 meters long and up to 300 in diameter, and another 3.7 meter wide and still not known how long but most probably 2 or 12 meters, 2 since i do not have space or 12 if i can put it outside. Totally exaggerated and useless but i need it to prove a point.