Help troubleshoot my Plasmac cfg

More
7 years 4 months ago #136144 by phillc54
Replied by phillc54 on topic Help troubleshoot my Plasmac cfg
Delete that link and create a new one.

Did you use configurator.py to create your config?

Cheers, Phill.

Please Log in to join the conversation.

More
7 years 4 months ago #136147 by mkardasi
Replied by mkardasi on topic Help troubleshoot my Plasmac cfg

phillc54 wrote: Delete that link and create a new one.

Did you use configurator.py to create your config?

Cheers, Phill.



Phil, I did indeed use configurator.py. If I'm interpreting ls -l right, all my symlinks are pointing back to themselves?

Code:
mkardasi@LinuxCNC:~/linuxcnc/configs/esab-plasmac$ ls -l total 60 -rw-r--r-- 1 mkardasi mkardasi 980 Jun 5 22:04 esab-plasmac_connections.hal -rw-r--r-- 1 mkardasi mkardasi 4921 Jun 5 22:04 esab-plasmac.hal -rw-r--r-- 1 mkardasi mkardasi 8020 Jun 6 20:14 esab-plasmac.ini -rw-r--r-- 1 mkardasi mkardasi 600 Jun 5 22:04 esab-plasmac_material.cfg -rw-r--r-- 1 mkardasi mkardasi 1666 Jun 6 21:00 imperial_parameters.txt -rw-r--r-- 1 mkardasi mkardasi 1666 Jun 6 20:18 imperial_parameters.txt.bak lrwxrwxrwx 1 mkardasi mkardasi 22 Jun 5 22:04 imperial_startup.ngc -> ./imperial_startup.ngc lrwxrwxrwx 1 mkardasi mkardasi 6 Jun 5 22:04 M190 -> ./M190 lrwxrwxrwx 1 mkardasi mkardasi 19 Jun 5 22:04 materialverter.py -> ./materialverter.py lrwxrwxrwx 1 mkardasi mkardasi 20 Jun 5 22:04 metric_startup.ngc -> ./metric_startup.ngc -rw-r--r-- 1 mkardasi mkardasi 4921 Jun 5 22:04 _original_7i96_base_cfg.hal -rw-r--r-- 1 mkardasi mkardasi 4073 Jun 5 22:04 _original_7i96_base_cfg.ini lrwxrwxrwx 1 mkardasi mkardasi 17 Jun 5 22:04 plasmac_axis.py -> ./plasmac_axis.py lrwxrwxrwx 1 mkardasi mkardasi 22 Jun 5 22:04 plasmac_config.glade -> ./plasmac_config.glade lrwxrwxrwx 1 mkardasi mkardasi 20 Jun 5 22:04 plasmac_config.hal -> ./plasmac_config.hal lrwxrwxrwx 1 mkardasi mkardasi 19 Jun 5 22:04 plasmac_config.py -> ./plasmac_config.py lrwxrwxrwx 1 mkardasi mkardasi 18 Jun 5 22:04 plasmac_gcode.py -> ./plasmac_gcode.py -rw-r--r-- 1 mkardasi mkardasi 2274 Jun 5 22:04 plasmac.hal lrwxrwxrwx 1 mkardasi mkardasi 19 Jun 5 22:04 plasmac_run.glade -> ./plasmac_run.glade lrwxrwxrwx 1 mkardasi mkardasi 17 Jun 5 22:04 plasmac_run.hal -> ./plasmac_run.hal lrwxrwxrwx 1 mkardasi mkardasi 16 Jun 5 22:04 plasmac_run.py -> ./plasmac_run.py lrwxrwxrwx 1 mkardasi mkardasi 21 Jun 5 22:04 plasmac_stats.glade -> ./plasmac_stats.glade lrwxrwxrwx 1 mkardasi mkardasi 19 Jun 5 22:04 plasmac_stats.hal -> ./plasmac_stats.hal lrwxrwxrwx 1 mkardasi mkardasi 18 Jun 5 22:04 plasmac_stats.py -> ./plasmac_stats.py -rw-r--r-- 1 mkardasi mkardasi 519 Jun 5 22:04 postgui.hal lrwxrwxrwx 1 mkardasi mkardasi 11 Jun 5 22:04 README.md -> ./README.md -rw-r--r-- 1 mkardasi mkardasi 1666 Jun 6 20:11 rs274ngc.var -rw-r--r-- 1 mkardasi mkardasi 1666 Jun 6 20:11 rs274ngc.var.bak lrwxrwxrwx 1 mkardasi mkardasi 10 Jun 5 22:04 tool.tbl -> ./tool.tbl

Please Log in to join the conversation.

More
7 years 4 months ago #136148 by phillc54
Replied by phillc54 on topic Help troubleshoot my Plasmac cfg
Did you run it from ~/linuxcnc-plasmac/configs/by_machine/plasmac or from ~/linuxcnc/configs/esab-plasmac?

Cheers, Phill.

Please Log in to join the conversation.

More
7 years 4 months ago #136149 by mkardasi
Replied by mkardasi on topic Help troubleshoot my Plasmac cfg

phillc54 wrote: Did you run it from ~/linuxcnc-plasmac/configs/by_machine/plasmac or from ~/linuxcnc/configs/esab-plasmac?

Cheers, Phill.


~/linuxcnc-plasmac/configs/by_machine/plasmac

Please Log in to join the conversation.

More
7 years 4 months ago #136150 by phillc54
Replied by phillc54 on topic Help troubleshoot my Plasmac cfg
Hmmm, not sure what is happening.

Try:
Code:
~/linuxcnc-plasmac/configs/by_machine/plasmac/configurator.py
then select upgrade then your ini file and see if that fixes it.

Cheers, Phill.

Please Log in to join the conversation.

More
7 years 4 months ago #136151 by mkardasi
Replied by mkardasi on topic Help troubleshoot my Plasmac cfg

phillc54 wrote: Hmmm, not sure what is happening.

Try:

Code:
~/linuxcnc-plasmac/configs/by_machine/plasmac/configurator.py
then select upgrade then your ini file and see if that fixes it.

Cheers, Phill.


Looks like the links are correct!

Code:
mkardasi@LinuxCNC:~$ ~/linuxcnc-plasmac/configs/by_machine/plasmac/configurator.py mkardasi@LinuxCNC:~$ cd linuxcnc/configs/esab-plasmac-configurator.py-test/ mkardasi@LinuxCNC:~/linuxcnc/configs/esab-plasmac-configurator.py-test$ ls -l total 100 -rw-r--r-- 1 mkardasi mkardasi 980 Jun 6 21:46 esab-plasmac-configurator.py-test_connections.hal -rw-r--r-- 1 mkardasi mkardasi 4073 Jun 6 21:46 esab-plasmac-configurator.py-test.hal -rw-r--r-- 1 mkardasi mkardasi 8075 Jun 6 21:46 esab-plasmac-configurator.py-test.ini -rw-r--r-- 1 mkardasi mkardasi 600 Jun 6 21:46 esab-plasmac-configurator.py-test_material.cfg lrwxrwxrwx 1 mkardasi mkardasi 79 Jun 6 21:46 imperial_startup.ngc -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/imperial_startup.ngc lrwxrwxrwx 1 mkardasi mkardasi 63 Jun 6 21:46 M190 -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/M190 lrwxrwxrwx 1 mkardasi mkardasi 76 Jun 6 21:46 materialverter.py -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/materialverter.py lrwxrwxrwx 1 mkardasi mkardasi 77 Jun 6 21:46 metric_startup.ngc -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/metric_startup.ngc -rw-r--r-- 1 mkardasi mkardasi 4073 Jun 6 21:46 _original_7i96_base_cfg.ini lrwxrwxrwx 1 mkardasi mkardasi 74 Jun 6 21:46 plasmac_axis.py -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/plasmac_axis.py lrwxrwxrwx 1 mkardasi mkardasi 79 Jun 6 21:46 plasmac_config.glade -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/plasmac_config.glade lrwxrwxrwx 1 mkardasi mkardasi 77 Jun 6 21:46 plasmac_config.hal -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/plasmac_config.hal lrwxrwxrwx 1 mkardasi mkardasi 76 Jun 6 21:46 plasmac_config.py -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/plasmac_config.py lrwxrwxrwx 1 mkardasi mkardasi 75 Jun 6 21:46 plasmac_gcode.py -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/plasmac_gcode.py -rw-r--r-- 1 mkardasi mkardasi 2295 Jun 6 21:46 plasmac.hal lrwxrwxrwx 1 mkardasi mkardasi 76 Jun 6 21:46 plasmac_run.glade -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/plasmac_run.glade lrwxrwxrwx 1 mkardasi mkardasi 74 Jun 6 21:46 plasmac_run.hal -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/plasmac_run.hal lrwxrwxrwx 1 mkardasi mkardasi 73 Jun 6 21:46 plasmac_run.py -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/plasmac_run.py lrwxrwxrwx 1 mkardasi mkardasi 78 Jun 6 21:46 plasmac_stats.glade -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/plasmac_stats.glade lrwxrwxrwx 1 mkardasi mkardasi 76 Jun 6 21:46 plasmac_stats.hal -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/plasmac_stats.hal lrwxrwxrwx 1 mkardasi mkardasi 75 Jun 6 21:46 plasmac_stats.py -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/plasmac_stats.py -rw-r--r-- 1 mkardasi mkardasi 519 Jun 6 21:46 postgui.hal lrwxrwxrwx 1 mkardasi mkardasi 68 Jun 6 21:46 README.md -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/README.md lrwxrwxrwx 1 mkardasi mkardasi 67 Jun 6 21:46 tool.tbl -> /home/mkardasi/linuxcnc-plasmac/configs/by_machine/plasmac/tool.tbl mkardasi@LinuxCNC:~/linuxcnc/configs/esab-plasmac-configurator.py-test$

Please Log in to join the conversation.

More
7 years 4 months ago #136152 by phillc54
Replied by phillc54 on topic Help troubleshoot my Plasmac cfg
That's good, is your config working now.

Cheers, Phill.

Please Log in to join the conversation.

More
7 years 4 months ago #136153 by mkardasi
Replied by mkardasi on topic Help troubleshoot my Plasmac cfg

phillc54 wrote: That's good, is your config working now.

Cheers, Phill.


Yes sir. I just had to recreate the config again with configurator.py. It didn't like like the period in machine name. "esab-plasmac-configurator.py-test" changed it to "esab-plasmac-configurator-test" and it loads just fine.

Thank you very much Phil and all that responded. Your help was invaluable.
-MK

Please Log in to join the conversation.

More
7 years 4 months ago #136158 by phillc54
Replied by phillc54 on topic Help troubleshoot my Plasmac cfg

mkardasi wrote: Yes sir. I just had to recreate the config again with configurator.py. It didn't like like the period in machine name. "esab-plasmac-configurator.py-test" changed it to "esab-plasmac-configurator-test" and it loads just fine.

Thank you very much Phil and all that responded. Your help was invaluable.
-MK

You are welcome, thanks for the report. I will add some error checking for that scenario.

Cheers, Phill.

Please Log in to join the conversation.

Time to create page: 0.062 seconds
Powered by Kunena Forum