ArcOK when not built-in

2 years 9 months ago #291636 by vre

Replied by vre on topic ArcOK when not built-in

What reed switch is suitable? any link?

Please Log in to join the conversation.

2 years 9 months ago #291646 by tommylight

Replied by tommylight on topic ArcOK when not built-in

So far any reed i used just worked, be it the glass ones or plastic ones. Usually 20-25mm in length, no idea what model or type.

Please Log in to join the conversation.

2 years 9 months ago #291791 by Joco

Replied by Joco on topic ArcOK when not built-in

I used this one mounted on some perf board as a suport.

www.jaycar.co.nz/miniature-glass-reed-sw...9ce93584b9ac94931f2d

Please Log in to join the conversation.

4 months 3 weeks ago #346977 by newcncenthusiast

Replied by newcncenthusiast on topic ArcOK when not built-in

I purchased these and tested with a door sensor magnet and then the 3 coil wrap and works great for ARC_OK on fluidNC board.

www.amazon.com/dp/B07YDJ1PMB?ref_=ppx_hz...ed_asin_title_1&th=1

Please Log in to join the conversation.

Time to create page: 0.072 seconds