Opening folders and list of materials does not work

More
7 years 2 months ago #143089 by phillc54
Replied by phillc54 on topic Opening folders and list of materials does not work
It probably sounds silly but have you tried rebooting the machine.

Please Log in to join the conversation.

More
7 years 2 months ago #143090 by KRAD-AT
Replied by KRAD-AT on topic Opening folders and list of materials does not work
Yes I did multiple times. It's strange since the other config does work properly.

Thank you for your help!

Please Log in to join the conversation.

  • thefabricator03
  • New Member
  • New Member
More
7 years 2 months ago #143123 by thefabricator03
Replied by thefabricator03 on topic Opening folders and list of materials does not work
I have this problem, When you select a folder press the Enter key on your keyboard to open the folder,

I thought it must be some kind of design feature for Axis.

Please Log in to join the conversation.

More
7 years 2 months ago #143146 by KRAD-AT
Replied by KRAD-AT on topic Opening folders and list of materials does not work
You are right. I just tested it and using the enter key works but it is still a strange bug. However i can test it now.

Please Log in to join the conversation.

More
7 years 2 months ago #143151 by KRAD-AT
Replied by KRAD-AT on topic Opening folders and list of materials does not work
Once again i ran into a problem with Plasmac.
I set up the limits and homing for my zaxis but probing does not work.
It probes in the wrong direction. Homing works perfect but it probes upwards not down.
What could be wrong?

Please Log in to join the conversation.

More
7 years 2 months ago #143153 by tommylight
Replied by tommylight on topic Opening folders and list of materials does not work
Did you try to set the probing speed to a negative value ?

Please Log in to join the conversation.

More
7 years 2 months ago #143161 by KRAD-AT
Replied by KRAD-AT on topic Opening folders and list of materials does not work
Yes but it seems to ignore it.
Maybe negative numbers are not allowed for this value.

Please Log in to join the conversation.

More
7 years 2 months ago #143162 by tommylight
Replied by tommylight on topic Opening folders and list of materials does not work
When you press pg_down for jogging, does the Z axis move down ?

Please Log in to join the conversation.

More
7 years 2 months ago #143163 by KRAD-AT
Replied by KRAD-AT on topic Opening folders and list of materials does not work
yes it does. auto homing also works.

Please Log in to join the conversation.

More
7 years 2 months ago #143164 by tommylight
Replied by tommylight on topic Opening folders and list of materials does not work
Strange..... out of ideas for now.

Please Log in to join the conversation.

Time to create page: 0.065 seconds
Powered by Kunena Forum