Axis requires a few more entries in the INI file:
For the [PLASMAC] section:
Code:
# the font for the Axis GUI, if not specified 'sans 10' will be used
# valid font sizes are from 10 to 15
FONT = sans 11
# the window size for the Axis GUI, 0 = minimum size to suit font, 1 = maximized
MAXIMISED = 0
# the theme for the Axis GUI tabs, if not specified the system theme will be used
THEME = Clearlooks
For the [DISPLAY] section:
Note that the tab panels are similar plus some are not required.
Code:
TOOL_EDITOR = tooleditor x y
# required
USER_COMMAND_FILE = plasmac_axis.py
# required
# for a working config add these to the [DISPLAY] section in your working configs ini file
EMBED_TAB_NAME = Statistics
EMBED_TAB_COMMAND = gladevcp -c plasmac_stats -x {XID} -u ./plasmac_stats.py -H ./plasmac_stats.hal plasmac_stats.glade
# use one of the next two
# run panel in tab behind preview
EMBED_TAB_NAME = Plasma Run
EMBED_TAB_COMMAND = gladevcp -c plasmac_run -x {XID} -u ./plasmac_run.py -H plasmac_run.hal plasmac_run_tab.glade
# run panel in panel on right side
#GLADEVCP = -c plasmac_run -u ./plasmac_run.py -H plasmac_run.hal plasmac_run_panel.glade
EMBED_TAB_NAME = Plasma Config
EMBED_TAB_COMMAND = gladevcp -c plasmac_config -x {XID} -u ./plasmac_config.py -H plasmac_config.hal plasmac_config.glade
