Manually cut off with PlasmaC

Phill, looks great. Time for me to do an upgrade I see. From the fields on the screen, does that imply that you can do a diagonal cut? If not, it would be better to have one length field and select x or y direction.

Yes, say you enter 300 for x and 100 for y then the cut will end 300,100 from the start position.

Edit: I probably should have put that in the docs...

Phill, the cut terminates with an error about 220mm into the cut "Its not possible to change to auto mode at the moment"

Regardless of X or Y direction

Temporary fix pushed.

It will stay in MDI mode after the cut.

Confirmed working. Very nice. You can even save the settings.