GUI for PlasmaC - QtPlasmac

rodw
Offline
Platinum Member

5 years 8 months ago #198712 by rodw

Replied by rodw on topic GUI for PlasmaC - QtPlasmac

Updated 2.9 RIP this morning and I'm getting this on startup:

Code:

 Qtvcp encountered an error.  The following information may be useful in troubleshooting:
LinuxCNC Version  : 2.9.0~pre0

Traceback (most recent call last):
  File "/home/rod/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 1395, in <lambda>
    self.consChangePin.value_changed.connect(lambda v:self.consumable_change_changed(v))
  File "/home/rod/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 1154, in consumable_change_changed
    self.w[self.ccButton].setEnabled(False)
  File "/home/rod/linuxcnc-dev/lib/python/qtvcp/qt_makegui.py", line 341, in __getitem__
    return getattr(self, item)
AttributeError: 'VCPWindow' object has no attribute ''

This is on my Chromebook. Is there another new module required?

Please Log in to join the conversation.

snowgoer540
Offline
Platinum Member

5 years 8 months ago #198713 by snowgoer540

Replied by snowgoer540 on topic GUI for PlasmaC - QtPlasmac

rodw wrote: Updated 2.9 RIP this morning and I'm getting this on startup:

Code:

Qtvcp encountered an error. The following information may be useful in troubleshooting: LinuxCNC Version : 2.9.0~pre0 Traceback (most recent call last): File "/home/rod/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 1395, in <lambda> self.consChangePin.value_changed.connect(lambda v:self.consumable_change_changed(v)) File "/home/rod/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 1154, in consumable_change_changed self.w[self.ccButton].setEnabled(False) File "/home/rod/linuxcnc-dev/lib/python/qtvcp/qt_makegui.py", line 341, in __getitem__ return getattr(self, item) AttributeError: 'VCPWindow' object has no attribute ''

This is on my Chromebook. Is there another new module required?

Phill changed some code for the Change Consumables stuff, and it's (I think accidentally) assuming you have a "change consumables" button.

To get past this in the meantime I just added a change consumables button. For example (formatted for dinosaurs):

Code:

BUTTON_6_NAME           = CHANGE\TIPS
BUTTON_6_CODE           = change-consumables X1 Y1 F150

This may help you as well: linuxcnc.org/docs/devel/html/plasma/qtpl...t_button-consumables

I'm sure it will get tidied up then.

Please Log in to join the conversation.

Mud
Offline
Premium Member

5 years 8 months ago #198715 by Mud

Replied by Mud on topic GUI for PlasmaC - QtPlasmac

I've been watching this thread with interest but sadly been too short on time to play. I'm currently running Linux 2.8 on Mint 19.2 and I must be 3+ months behind on PlasmaC - I've ordered a new SSD to join in without worry of scuppering myself and running out of playtime. What's the current recommendation to get up and running with minimal fuss?

Please Log in to join the conversation.

rodw
Offline
Platinum Member

5 years 8 months ago #198725 by rodw

Replied by rodw on topic GUI for PlasmaC - QtPlasmac

snowgoer540 wrote: To get past this in the meantime I just added a change consumables button. For example (formatted for dinosaurs):

Code:

BUTTON_6_NAME = CHANGE\TIPS BUTTON_6_CODE = change-consumables X1 Y1 F150

I'm sure it will get tidied up then.

Thanks that fixed it. I added that to the sim's ini file (or the .inc file.) and it works.

Code:

/linuxcnc-dev/configs/by_machine/qtplasmac

Mud, youi just need to install V 2.9 and its deployed for you. Then read the docs

Please Log in to join the conversation.

rodw
Offline
Platinum Member

5 years 8 months ago #198728 by rodw

Replied by rodw on topic GUI for PlasmaC - QtPlasmac

Mud wrote: I've been watching this thread with interest but sadly been too short on time to play. I'm currently running Linux 2.8 on Mint 19.2 and I must be 3+ months behind on PlasmaC - I've ordered a new SSD to join in without worry of scuppering myself and running out of playtime. What's the current recommendation to get up and running with minimal fuss?

What I did when I was way out of date was to build a config with pncconf with no config and cut and paste the configured data until I had a working config without plasma, Than ran the configurator.

I think I'll need to do that again with qt plasmac soon. I have it running with a 7i76e in my office but no motion hardware.

Please Log in to join the conversation.

tommylight
Away
Administrator

5 years 8 months ago #198734 by tommylight

Replied by tommylight on topic GUI for PlasmaC - QtPlasmac

If you mean installing and everything else:
forum.linuxcnc.org/9-installing-linuxcnc...nd-easy-installation
forum.linuxcnc.org/qtvcp/38414-installing-qtvcp
will get you up and running in under an hour including the downloads.

Please Log in to join the conversation.

tommylight
Away
Administrator

5 years 8 months ago #198735 by tommylight

Replied by tommylight on topic GUI for PlasmaC - QtPlasmac

rodw wrote: I think I'll need to do that again with qt plasmac soon.

Shhh.... do not tell Phill, but i did make QtPlasmaC work on the big machine in about 5 minutes, then after a while tried to do that on my main PC and could not make it work for over an hour so i gave up ! I will have to copy it from there and use it everywhere and save it as if it was dinosaurs DNA ! No, not the Australian "dinosaur" that you guys keep mentioning, i still do no know what that is about or i forgot or ...

Please Log in to join the conversation.

phillc54
Topic Author
Offline
Platinum Member

5 years 8 months ago #198742 by phillc54

Replied by phillc54 on topic GUI for PlasmaC - QtPlasmac

rodw wrote: Updated 2.9 RIP this morning and I'm getting this on startup:

Code:

Qtvcp encountered an error. The following information may be useful in troubleshooting: LinuxCNC Version : 2.9.0~pre0 Traceback (most recent call last): File "/home/rod/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 1395, in <lambda> self.consChangePin.value_changed.connect(lambda v:self.consumable_change_changed(v)) File "/home/rod/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 1154, in consumable_change_changed self.w[self.ccButton].setEnabled(False) File "/home/rod/linuxcnc-dev/lib/python/qtvcp/qt_makegui.py", line 341, in __getitem__ return getattr(self, item) AttributeError: 'VCPWindow' object has no attribute ''

This is on my Chromebook. Is there another new module required?

I just pushed the fix for this.

Please Log in to join the conversation.

rodw
Offline
Platinum Member

5 years 8 months ago #198746 by rodw

Replied by rodw on topic GUI for PlasmaC - QtPlasmac

phillc54 wrote:

I just pushed the fix for this.[/quote]

Thanks, I was thinking afterwards that there needs to be some error checking for this so that a user changing a button config does not break the system.

And don't forget we need a few buttons left for the user to use!

Please Log in to join the conversation.

phillc54
Topic Author
Offline
Platinum Member

5 years 8 months ago #198749 by phillc54

Replied by phillc54 on topic GUI for PlasmaC - QtPlasmac

rodw wrote:
phillc54 wrote: I just pushed the fix for this.
Thanks, I was thinking afterwards that there needs to be some error checking for this so that a user changing a button config does not break the system.

There is and this was a bug...

And don't forget we need a few buttons left for the user to use!

The eight user buttons can be any valid user button, none are set in stone...

Please Log in to join the conversation.

Time to create page: 0.131 seconds