Moving PlasmaC to another PC

6 years 7 months ago #160418 by Clive S

Moving PlasmaC to another PC was created by Clive S

Is it possible just to move the config folder to another PC with the same version of Linuxcnc

Or do I have to start from scratch again?

Please Log in to join the conversation.

6 years 7 months ago #160422 by tommylight

Replied by tommylight on topic Moving PlasmaC to another PC

Just copy the config folder.
Beware that if there are any halcompiled comps, they would also need to be copied and halcompiled again.

Please Log in to join the conversation.

Time to create page: 0.071 seconds