Error after Update

More
6 years 6 months ago #166166 by phillc54
Replied by phillc54 on topic Error after Update
Is that current conversational code or saved from a short time back?

Please Log in to join the conversation.

More
6 years 6 months ago #166167 by snowgoer540
Replied by snowgoer540 on topic Error after Update
I lied ha! Figured I'd just grab them quick. attached are settings and the line gcode file from the conversational extras.

Please Log in to join the conversation.

More
6 years 6 months ago #166168 by snowgoer540
Replied by snowgoer540 on topic Error after Update

phillc54 wrote: Is that current conversational code or saved from a short time back?


conversational from a few minutes ago.

Please Log in to join the conversation.

More
6 years 6 months ago #166169 by phillc54
Replied by phillc54 on topic Error after Update
Ok, I will check it out when I get back.

Keeping my eye shut, the missus is driving ;)

Please Log in to join the conversation.

More
6 years 6 months ago #166170 by snowgoer540
Replied by snowgoer540 on topic Error after Update

phillc54 wrote: Ok, I will check it out when I get back.

Keeping my eye shut, the missus is driving ;)


Haha no worries Phill! Enjoy the evening.

Thanks again (as always)

Please Log in to join the conversation.

More
6 years 6 months ago #166171 by phillc54
Replied by phillc54 on topic Error after Update
Morning for me, 9:30am

Please Log in to join the conversation.

More
6 years 6 months ago #166172 by phillc54
Replied by phillc54 on topic Error after Update
Could you do the following in a terminal:
Code:
ls -l ~/linuxcnc/configs/your_config_dir ls -l ~/linuxcnc/configs/your_config_dir/wizards
then post the results.

Please Log in to join the conversation.

More
6 years 6 months ago #166174 by snowgoer540
Replied by snowgoer540 on topic Error after Update

phillc54 wrote: Morning for me, 9:30am



:laugh: Enjoy your morning then! ... when will then be now?! SOON.

Attached are the results.

Please Log in to join the conversation.

More
6 years 6 months ago #166175 by phillc54
Replied by phillc54 on topic Error after Update
Oops, the wizards should have had a / at he end

Please Log in to join the conversation.

More
6 years 6 months ago #166177 by snowgoer540
Replied by snowgoer540 on topic Error after Update

phillc54 wrote: Oops, the wizards should have had a / at he end


at least no one can say i dont follow directions well...

attached

Please Log in to join the conversation.

Time to create page: 0.303 seconds
Powered by Kunena Forum