THC not showing on screen

Okay I did that but I am not sure if I missed something because now I am getting these two errors

You posted them twice, so we can see them.
That error is due to choosing material number 2 in SheetCAM, but there is no material number 2 in PlasmaC, so you will either have to choose material 0 in SheetCAM or add material 2 to PlasmaC.

tommylight wrote: You posted them twice, so we can see them.
That error is due to choosing material number 2 in SheetCAM, but there is no material number 2 in PlasmaC, so you will either have to choose material 0 in SheetCAM or add material 2 to PlasmaC.

In fairness, for 100% clarity, Material 1 is missing as well... So same advice as above, but with Material number 1... Sorry Tommy :laugh:

Thanks guys I will try and figure that out also can phillc54 please remove the two unnecessary posts for me.

snowgoer540 wrote: ... Sorry Tommy :laugh:

I see nothing to be sorry about !