Raspberry Pi4 Hal configuration for torch on

6 years 4 months ago #172782 by phillc54

Replied by phillc54 on topic Raspberry Pi4 Hal configuration for torch on

If your plasma machine doesn't have an Arc OK output you could do something like this.
linuxcnc.org/docs/2.8/html/plasma/plasma...ide.html#reed-arc-ok

Please Log in to join the conversation.

6 years 4 months ago #172783 by greekart

Replied by greekart on topic Raspberry Pi4 Hal configuration for torch on

That’s great, thanks a lot.

Please Log in to join the conversation.

Time to create page: 0.034 seconds