Hi. i have fresh install and i used the plasmac user guide to install it.
Linux linuxcnc 4.9.0-8-rt-amd64 #1 SMP PREEMPT RT Debian 4.9.110-3+deb9u6 (2018-10-08) x86_64 GNU/Linux
I can from sample configurations create desktop shortcuts or open without shortcuts different configurations but when i try plasmac i get this error
-
Code:
LINUXCNC - 2.8.0-pre1-6041-gb8805cef3
Error in startup script: cp: cannot copy cyclic symbolic link '/usr/share/doc/linuxcnc/examples/sample-configs/by_machine/plasmac/axis/plasmac/axis/plasmac'
cp: cannot copy cyclic symbolic link '/usr/share/doc/linuxcnc/examples/sample-configs/by_machine/plasmac/axis/plasmac/gmoccapy/plasmac'
while executing
"exec cp -rL [file join $chosendir $f] $copytodir"
(procedure "prompt_copy" line 147)
invoked from within
"prompt_copy $::inifile"
invoked from within
"if [ok_to_copy_config $::inifile] {
set copied_inifile [prompt_copy $::inifile]
if {$copied_inifile == ""} {
c..."
("while" body line 6)
invoked from within
"while {1} {
focus $::tree
vwait ::choice
if { $::choice == "OK" } {
if [ok_to_copy_config $::inifile] {
set copied_in..."
(file "/usr/lib/tcltk/linuxcnc/bin/pickconfig.tcl" line 875)
im just playing around, checking GUIs to choose the one i like...i managed to install QT to play with QT GUIs (i receive message error about missing QT)
What i need to do to fix it and get plasmac simulation run? thanks
