Hi guys been following the other threads on Raspberry pi with base linuxcnc and plasmac. Thought maybe this ? is generic enough for a new thread. I have a mostly working Plasmac following the user guide....2.7 to 2.9 with plasma c configurator.....driving Mesa 7i76 via Ethernet with Mesa thcad for voltage control. AMD 64 Ryzen is the CPU.
1. Can I convert over to Ras pi4b 4g by etching my working image over to the pi SD card....or in my inexperience is that a trash idea. PI is using it's HDMI output for video. From what I've read latency isn't too bad....maybe core and video tweaking is needed.
2. Or do I start over with the same steps in the user guide only running on the Rpi4.?
All thoughts most appreciated.
